We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
High-performance OFC turntable cable with ground wire, twin-lead design, spiral shield, PVC jacket

North American Herb & Spice

North American Herb & Spice High Performance OFC Turntable Cable with Ground Wire

SKU CH-15CN-36G32

Connects turntable to phono stage using twin-lead 27 AWG OFC conductors with 100% spiral shield and 18 AWG ground wire

  • TypeComponent Cables
  • Oxygen-free copper conductors deliver clean low-level signal transfer
  • Twin-lead geometry with low capacitance preserves high-frequency detail
  • 100 % spiral shield blocks external noise from delicate cartridge output
  • 18 AWG ground wire with fork connector ensures secure chassis grounding
  • 6-inch ground leads at each end simplify connection to ground screw

Turntable cable with ground wire

This oxygen-free copper cable is built for vinyl playback systems that need clean transfer of very low-level phono signals. It suits owners of moving-magnet or moving-coil cartridges who want a dedicated interconnect with an integrated grounding conductor. The twin-lead geometry and spiral shielding are intended to preserve delicate groove information without adding noise.

Sustained signal integrity

The 27 AWG OFC centre conductors and 100% spiral shield maintain consistent capacitance and shielding effectiveness over the full length of the cable during extended listening sessions. Low capacitance prevents high-frequency roll-off that can accumulate with longer runs. The ground wire remains electrically continuous at both ends so hum rejection does not degrade as the system warms up.

Thermals noise and power

As a passive analogue interconnect the cable draws no power and generates no heat or fan noise in normal use. The PVC jacket stays flexible at room temperature and the fork-terminated 18 AWG ground wire makes a secure chassis connection without mechanical strain. No active components mean there is no thermal load to manage.

Highlights

  • Oxygen-free copper conductors deliver clean low-level signal transfer
  • Twin-lead geometry with low capacitance preserves high-frequency detail
  • 100 % spiral shield blocks external noise from delicate cartridge output
  • 18 AWG ground wire with fork connector ensures secure chassis grounding
  • 6-inch ground leads at each end simplify connection to ground screw

Specifications

TypeComponent Cables

Questions about this item

Does the 27 AWG OFC conductor and 100% spiral shield keep noise low during long listening sessions?

The twin-lead design uses 27 AWG oxygen-free copper conductors with a full spiral shield to minimise noise and prevent high-frequency loss during extended play.

What must my turntable and amplifier provide for this cable to work?

You need RCA phono inputs on your preamp or amplifier and a chassis ground screw to accept the fork-terminated ground wire.

Will the 18 AWG ground wire reach the grounding post on my vintage receiver?

The ground wire extends 6 inches at each end, giving enough length to connect the fork connector to older chassis ground screws.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.