We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black elastomeric tee pipe fitting with smooth matte finish

Nomaco Kflex

Nomaco Kflex 801-T-048238 Trap 2-3/8" x 59/64

SKU CH-T050-8AANB MPN 801-T-048238

Elastomeric tee pipe fitting insulates 2-inch piping from -297°F to 220°F with R-3.1 thermal resistance

  • TypeDrain Components
  • ColorBlack
  • Withstands -297 °F to 220 °F extremes thanks to NBR/PVC elastomeric construction
  • Delivers R-3.1 thermal resistance through 1/2 in wall thickness
  • Fits 2 3/8 in nominal ID piping for secure tee connections
  • Compact 59/64 in length suits tight duct and tank installations
  • Black NBR/PVC material resists moisture and UV for long service life

Tee pipe fitting for 2 3/8 inch pipe

This elastomeric tee fitting is designed to connect three pipe sections in plumbing or HVAC installations. The NBR/PVC material provides thermal insulation across a temperature range of -297 to 220 degrees Fahrenheit. It suits contractors and maintenance teams needing reliable joint protection on two-inch nominal pipe.

Check pipe size and insulation thickness

Verify that the existing pipe has a nominal inside diameter of 2 3/8 inches to match the fitting. Confirm the system operates within the stated temperature limits and that a half-inch wall thickness meets the project insulation specification. The fitting length is 59/64 inch, so allow adequate space at the junction.

Black NBR/PVC construction

The black elastomeric body resists moisture and condensation on ducts, tanks and piping. Its closed-cell structure delivers an approximate R value of 3.1 for thermal efficiency. The tee shape allows straightforward branching without additional couplings, simplifying on-site assembly.

Highlights

  • Withstands -297 °F to 220 °F extremes thanks to NBR/PVC elastomeric construction
  • Delivers R-3.1 thermal resistance through 1/2 in wall thickness
  • Fits 2 3/8 in nominal ID piping for secure tee connections
  • Compact 59/64 in length suits tight duct and tank installations
  • Black NBR/PVC material resists moisture and UV for long service life

Specifications

TypeDrain Components
ColorBlack
BrandNomaco Kflex
Model801-T-048238

Questions about this item

What comes in the box and do I need to buy adhesive or tape separately?

The package contains the pre-formed black elastomeric tee fitting sized for 2 in pipe with 1/2 in wall thickness. Adhesive or sealing tape is not included and must be purchased separately.

Should I choose the 2-3/8 in ID version or is another size available?

This model has a fixed nominal inside diameter of 2-3/8 in and a wall thickness of 1/2 in; no other dimensions are offered for this part number.

The R-value is shown as 3.1 — what does that deliver on a 2 in chilled-water line?

An R-value of 3.1 at 1/2 in wall thickness limits heat gain on a 2 in pipe operating between -297 °F and 220 °F, helping prevent condensation and maintain fluid temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.