We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible pipe insulation tube 1-1/4 inch diameter 6 foot length 1 inch wall thickness

Nomaco Kflex

Nomaco Kflex 6RX100158 Drain Trap 1-1/4" 6 ft 1" Wall

SKU CH-KSH9-Z784Z MPN 6RX100158

NBR/PVC elastomeric pipe insulation fits 1-1/4 inch pipe with a 1 inch wall thickness and a 6.6 R-value

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Withstands extreme cold down to -297 °F thanks to NBR/PVC elastomeric material
  • Handles high heat up to 220 °F for reliable performance in hot systems
  • Delivers strong thermal resistance with an R-value of 6.6 for energy efficiency
  • Fits 1-1/4 inch pipes precisely with 1 inch wall thickness for secure coverage
  • Ready for immediate installation as a new, unslit 6-foot length in black

Pipe insulation for 1-1/4" pipe

This black elastomeric pipe insulation fits 1-1/4 inch pipe and 1-5/8 inch tube with a 1 inch wall thickness. The six-foot length covers residential and commercial plumbing runs. The NBR/PVC based material suits hot and cold water lines in new installations or retrofit projects.

Operating range and thermal rating

The insulation performs from minus 297 degrees F to 220 degrees F and carries an approximate R-value of 6.6. This wide temperature span supports chilled water, refrigeration and hot water systems without additional jacketing in normal indoor use.

Unslit construction and daily handling

The unslit body requires cutting to length and sealing at joints during installation. The flexible elastomeric material bends around fittings without kinking and the black finish resists UV exposure on exposed runs. California Proposition 65 applies to this product.

Highlights

  • Withstands extreme cold down to -297 °F thanks to NBR/PVC elastomeric material
  • Handles high heat up to 220 °F for reliable performance in hot systems
  • Delivers strong thermal resistance with an R-value of 6.6 for energy efficiency
  • Fits 1-1/4 inch pipes precisely with 1 inch wall thickness for secure coverage
  • Ready for immediate installation as a new, unslit 6-foot length in black

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandNomaco Kflex
Model6RX100158

Questions about this item

How do I install the 1 in wall thickness insulation on a 1-1/4 in pipe and what step is often missed?

Slide the unslit tube over the pipe before final connections, then seal the seam with compatible adhesive tape; skipping the tape leaves a thermal bridge.

What maintenance or replacement will the NBR/PVC elastomeric insulation need over time?

Inspect annually for UV cracking or compression set; replace sections that have lost thickness or show surface degradation to maintain the R 6.6 value.

At what temperature limit does the insulation reach its maximum rated performance during sustained use?

Continuous exposure at 220 °F is the upper service limit; beyond this the material can degrade and lose insulating effectiveness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.