Noctua
Noctua NF-F12 iPPC 3000 PWM 120mm 3000 RPM case fan
A 120 mm PWM case fan rated for 3000 RPM with IP52 dust and water protection, focused-flow frame for high static pressure, and a 150 000 hour MTBF
- Focused Flow frame delivers high static pressure for dense radiators
- 750–3000 RPM PWM range enables automatic speed control
- IP52 certified water and dust protection suits harsh environments
- SSO2 bearing rated >150,000 hours for long-term reliability
- Fibre-glass reinforced polyamide construction withstands industrial use
Industrial-grade 120 mm PWM fan
The Noctua NF-F12 iPPC 3000 PWM is a 120 mm heavy-duty case fan built for industrial and high-performance PCs that demand maximum static pressure. Its focused-flow frame and 4-pin PWM control suit radiators, dense heatsinks and restrictive chassis where airflow resistance is high.
Thermals, noise and power
At 3000 RPM the fan reaches 43.5 dB(A) while delivering peak pressure; the PWM range drops to 750 RPM for quieter operation when full speed is not needed. The three-phase motor and SSO2 bearing keep power draw moderate and provide an MTTF above 150,000 hours.
Build integration
Fibre-glass reinforced polyamide blades and IP52-rated water and dust protection let the fan survive harsh environments without extra shielding. Standard 120 mm mounting holes and a 4-pin PWM connector fit any modern motherboard header, freeing builders from proprietary fan controllers.
Highlights
- Focused Flow frame delivers high static pressure for dense radiators
- 750–3000 RPM PWM range enables automatic speed control
- IP52 certified water and dust protection suits harsh environments
- SSO2 bearing rated >150,000 hours for long-term reliability
- Fibre-glass reinforced polyamide construction withstands industrial use
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4-pin PWM connector to my motherboard, and what is the common mistake with the minimum speed?
Plug the 4-pin PWM connector into a 4-pin fan header; the fan runs from 750 to 3000 RPM, so setting a curve below 750 RPM will stall the motor.
What maintenance does the SSO2 bearing require and when should I expect to replace the fan?
The SSO2 bearing is maintenance-free; with an MTTF over 150,000 hours, replacement is typically only needed after many years of continuous operation.
At what noise level does the fan peak during sustained maximum load?
At the maximum 3000 RPM the fan reaches 43.5 dB(A), which is the first acoustic limit you will hit under sustained heavy load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



