No Sew
No Sew USB 3.2 Gen 2x2 Type-E to Type-C Front Panel Cable 50cm 20Gbps
A USB 3.2 Gen 2x2 front-panel adapter cable delivers 20 Gbps data speeds via a 50 cm Type-E to Type-C link with a 12 cm PCI bracket
- TypeUSB
- Connector TypeUSB Type C to USB Type C
- Cable Length1.97 in.
- Length< 1"
- Thunderbolt 3USB Type C
- Connector Number1
- 20 Gbps data speed with USB 3.2 Gen 2x2 host controller
- Front-panel USB-C access for phones, drives and peripherals
- Metal PCI bracket and slot covers give secure, protected mounting
- 50 cm cable reaches most case layouts without strain
- Driver-free setup with keyed 20-pin Type-E header connector
Front Panel USB-C Adapter
This USB 3.2 Gen 2x2 front panel adapter adds a USB-C port to a computer case by connecting to a motherboard Type-E header. It includes a metal PCI bracket and two slot covers for secure mounting. The 50cm cable provides routing flexibility inside most cases. No drivers are required for operation.
Who This Suits
Builders adding a front USB-C port to a case with an available motherboard Type-E header will find this kit straightforward. Users needing Thunderbolt 3 support should verify host controller compatibility. Buyers whose motherboards lack a 20-pin Type-E A-Key header cannot use this adapter. Those requiring internal device connections instead of a front-panel port should look at a different cable type.
Speed Requirement
Full 20Gbps throughput depends on a dedicated USB 3.2 Gen 2x2 host controller on the motherboard. Without that controller the link will negotiate a lower speed. The adapter itself is passive and does not convert or boost the signal. Check your motherboard specifications before purchase.
Highlights
- 20 Gbps data speed with USB 3.2 Gen 2x2 host controller
- Front-panel USB-C access for phones, drives and peripherals
- Metal PCI bracket and slot covers give secure, protected mounting
- 50 cm cable reaches most case layouts without strain
- Driver-free setup with keyed 20-pin Type-E header connector
Specifications
| Brand | Qulkws |
|---|---|
| Model | XE00150744_80jhDioi |
| Type | USB |
| Connector Type | USB Type C to USB Type C |
| Cable Length | 1.97 in. |
| Length | < 1" |
| Thunderbolt 3 | USB Type C |
| Connector Number | 1 |
| Connector Detail | USB Type C |
| Apple Compatible | USB Type C |
| Specifications | USB Type C, 19.7, inches, XE00150744_80jhDioi, Qulkws |
| Features | USB Type C |
| Disclaimer | not_applicable |
| Electrical Outlet Plug Type | no_plug |
Questions about this item
What USB standard does the Type-E header support and what speed does it cap at in practice?
The cable uses the USB 3.2 Gen 2x2 standard and caps at 20Gbps when the motherboard has a dedicated Gen 2x2 host controller.
What physical space and mounting hardware are needed to fit the bracket?
A 12cm metal PCI bracket and two PCI slot covers are included; they occupy one rear expansion slot in the case.
How is the adapter installed and which step is often done wrong?
Plug the 20-pin Type-E A-Key male connector into the motherboard header matching the key orientation, then secure the bracket with a case screw; the key alignment is the step most often missed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



