No Sew
No Sew USB 2.0 Type A Male to Male cable 7 ft
Connects USB Type A peripherals to a host computer with a 7 ft ultra-flexible cable rated at .48 Gbps
- TypeUSB
- Connector TypeUSB Type A
- ColorBlack
- Cable Length7 ft
- Length7 ft
- Connector Number4
- Connects peripherals to a host computer via USB Type A male connectors
- Ultra soft and flexible 7 ft cable with 3.5 mm outer diameter
- Supports USB 2.0 data rates up to .48 gigabits per second
- Copper construction for reliable signal transmission
- Plug-and-play design works with printers, cameras, enclosures and modems
BesCable USB 2.0 Male-to-Male Cable
This 7 ft USB 2.0 Type A Male to Male cable links peripherals such as hard-drive enclosures, printers, modems and cameras to a host computer. It is intended for users who need a direct device-to-host connection rather than a computer-to-computer link.
Ultra-flexible 3.5 mm copper construction
The copper cable has an outer diameter of 3.5 mm and is described as ultra soft and ultra flexible, making it easy to route around a desk or through tight cable-management channels. Both ends carry USB 2.0 Type A Male connectors in a plug-and-play design that requires no driver installation.
USB 2.0 speed ceiling and host-only topology
The interface tops out at .48 gigabits per second, so large file transfers will be slower than on a 3.0 link, and the manufacturer notes that this male-to-male cord does not support direct data transfer between two computers. It is therefore unsuitable for peer-to-peer networking or PC-to-PC migration tasks.
Highlights
- Connects peripherals to a host computer via USB Type A male connectors
- Ultra soft and flexible 7 ft cable with 3.5 mm outer diameter
- Supports USB 2.0 data rates up to .48 gigabits per second
- Copper construction for reliable signal transmission
- Plug-and-play design works with printers, cameras, enclosures and modems
Specifications
| Brand | BesCable |
|---|---|
| Model | USB 2.0 Cable Male to Male |
| Type | USB |
| Connector Type | USB Type A |
| Color | Black |
| Cable Length | 7 ft |
| Length | 7 ft |
| Connector Number | 4 |
| Connector Detail | USB Type A |
| Terminal Gender | Male-to-Male |
| Speed | 0.48 gigabits_per_second |
| Apple Compatible | Printer |
| Construction | Copper |
| Features | Extra Flexible USB 2.0 Cable Male to Male |
Questions about this item
What does the USB 2.0 interface cap the transfer speed at?
The cable is rated for .48 Gbps, which is the maximum throughput of the USB 2.0 standard.
What clearance does the 3.5 mm outer diameter need to fit through?
The cable's 3.5 mm thickness requires at least a 4 mm opening to pass cleanly through grommets or tight routing channels.
How is the cable installed, and what mistake should be avoided?
Plug each Type A male end into a USB A female port on the host and peripheral; do not connect two computers directly because this cable does not support that link.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



