We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

No Sew

No Sew USB 2.0 Type-A Extension Cable Black 16.5 ft

SKU CH-73RQ-ANEPB

Extend USB devices up to 16.5 ft with a male-to-female Type-A cable supporting 480 Mbps data and stable power delivery

  • TypeUSB
  • Connector TypeUSB Type A
  • ColorBlack
  • Cable Length16.5 ft
  • Length16.5 ft
  • Connector Number4
  • Extend devices up to 16.5 ft away with male-to-female Type-A connectors
  • Transfer data at 480 Mbps using USB 2.0 specification
  • Route through tight spaces with ultra-flexible PVC jacket construction
  • Deliver stable power through 24 AWG internal wiring
  • Connect instantly with plug-and-play compatibility for USB-A peripherals

Extended Reach for USB Peripherals

This USB 2.0 Type-A extension cable adds 16.5 ft of length between a host computer and standard peripherals such as printers, scanners or flash drives. The male-to-female connectors allow instant plug-and-play use without any driver installation. It suits home offices or workstations where devices sit far from the host ports.

Thermals Noise and Power Draw

Passive copper conductors produce no audible noise and generate negligible heat during normal operation. The 24 AWG power cores deliver stable current to bus-powered devices while the 28 AWG data pair maintains signal integrity at 480 Mbps. PVC jacket insulation keeps the assembly cool to the touch under typical loads.

Replacing Shorter Cables and When to Upgrade

This cable replaces factory cables that are too short for flexible device placement or routing through tight conduits. The jump is worth it when the existing lead cannot reach the desired location or when frequent repositioning demands extra slack. Buyers who need higher bandwidth than .48 Gbps or longer runs beyond 16.5 ft will require a different solution.

Highlights

  • Extend devices up to 16.5 ft away with male-to-female Type-A connectors
  • Transfer data at 480 Mbps using USB 2.0 specification
  • Route through tight spaces with ultra-flexible PVC jacket construction
  • Deliver stable power through 24 AWG internal wiring
  • Connect instantly with plug-and-play compatibility for USB-A peripherals

Specifications

BrandUSBGear
ModelAA2FT-B
TypeUSB
Connector TypeUSB Type A
ColorBlack
Cable Length16.5 ft
Length16.5 ft
Connector Number4
Connector DetailUSB Type A
Terminal GenderMale-to-Female
Speed0.48 gigabits_per_second
ConstructionPVC

Questions about this item

How do I install the 16.5 ft USB 2.0 Type-A male-to-female extension cable and what step do people often get wrong?

Plug the male end into the host computer first, then connect your device cable into the female end; reversing this order leaves the extension loose and can strain the port.

What maintenance or replacement will the 24AWG power wire and 28AWG data pair cable need later?

Inspect the PVC jacket and connectors periodically for wear or bent pins; replace the cable if the jacket cracks or intermittent connections appear.

What limit appears first during sustained use of this 480 Mbps USB 2.0 extension?

The 16.5 ft length reaches the USB 2.0 maximum cable distance, so signal integrity becomes the limiting factor before bandwidth does.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.