We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular power bank with built-in cables and LED display

No Sew

No Sew T1116 10000mAh power bank with built-in cables

SKU CH-A009-B0Q41 MPN T1116

A 10000mAh power bank with four built-in cables and a digital display charges up to five devices at once

  • Type10000 milliamp_hours
  • ColorGreen
  • Capacity10000 milliamp_hours
  • Chemicallithium_polymer
  • Volt5 volts
  • Amp2 amps
  • Built-in iPhone, USB-C, Micro USB and USB-A cables remove the need for extra cords
  • 10000mAh capacity charges most phones 1.5 to 2 times for reliable backup power
  • Slim 5.7 x 2.57 x 0.72 inch profile and 260 gram weight slip easily into pockets or bags
  • Digital LED display shows exact remaining battery percentage at a glance
  • Intelligent protection guards against overcharging, overheating and short circuits for safe daily use

Compact 10000mAh power bank with integrated cables

This 10000mAh lithium-polymer power bank includes four built-in cables for iPhone, USB-C, Micro USB and USB-A, removing the need to carry separate cords. It suits commuters, travellers and anyone who wants a single unit that can charge a phone, earbuds or tablet without extra cables.

10000mAh capacity and multi-device output

The 10000mAh cell typically recharges most smartphones 1.5 to 2 times and can power up to five devices at once through the integrated cables plus the USB-C and USB-A ports. Output is limited to 5 volts at 2 amps, so larger tablets or laptops that need higher voltage will not charge at full speed.

Built-in cable set determines compatibility

The four fixed cables cover Lightning, USB-C, Micro USB and USB-A connections, so the power bank works straight out of the box for iPhone models 15 through 17, Android phones and legacy Micro USB gear. Devices that require a different connector or proprietary charging protocol cannot be used without an extra adapter.

Highlights

  • Built-in iPhone, USB-C, Micro USB and USB-A cables remove the need for extra cords
  • 10000mAh capacity charges most phones 1.5 to 2 times for reliable backup power
  • Slim 5.7 x 2.57 x 0.72 inch profile and 260 gram weight slip easily into pockets or bags
  • Digital LED display shows exact remaining battery percentage at a glance
  • Intelligent protection guards against overcharging, overheating and short circuits for safe daily use

Specifications

BrandVRURC
ModelT1116
Type10000 milliamp_hours
ColorGreen
Part NumberT1116
Capacity10000 milliamp_hours
Chemicallithium_polymer
Volt5 volts
Amp2 amps
OutputUSB C/USB-A/Micro/for iPhone Cables
InputUSB C/USB-A/Micro/for iPhone Cables
Dimension5.7 in x 2.7 in x 0.73 in
Weight260 grams

Questions about this item

Will the 10000mAh capacity charge my older Micro-USB phone and Lightning iPhone without carrying extra cords?

Yes, four integrated cables — Lightning for iPhone 15/16/17, USB-C, Micro-USB and USB-A — handle both legacy and current devices with no separate leads required.

How do I confirm the power bank is delivering charge correctly after I plug in my devices?

The built-in LED digital display shows the exact remaining percentage so you can verify output is active and track capacity in real time.

Which cables and accessories are included in the box versus what I must purchase separately?

The unit ships with four built-in cables (Lightning, USB-C, Micro-USB, USB-A) and a detachable lanyard that doubles as a Micro-USB cord; no extra cables are needed for supported devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.