Cable Techniques
Cable Techniques Smart Battery Adapter Cap to Hirose 4-Pin 24
$52.99
0.00063536BTC
In stock
No Sew
No Sew SP3060 Wired In-Ear Headphones 10mm 3.5mm
Wired in-ear earbuds with 10 mm drivers, 3.5 mm jack and 3.8 ft tangle-free cable for plug-and-play listening
- TypeIn-Ear
- ColorBlack
- Driver Unit10 millimeters
- Frequency Response20000 hertz
- THDIn Ear
- Input Impedance16 ohms
- 10 mm drivers deliver rich bass and clear highs
- Wired 3.5 mm plug gives instant audio with no charging needed
- 33 dB passive isolation blocks background noise for focused listening
- 8 ft tangle-free cable stays manageable during daily use
- Six ear-tip sizes (S/M/L) ensure a secure, comfortable fit
Wired In-Ear Headphones 10mm Driver
These wired in-ear headphones use a 10 millimetre driver and a 3.5mm connector for plug-and-play audio. They are built for listeners who want a simple, lightweight connection without batteries or pairing. The aluminium housing keeps weight low for daily carry. Buyers who need wireless freedom or active noise cancellation should look elsewhere.
Passive Isolation 33dB Noise Reduction
The in-ear seal delivers up to 33 decibels of passive noise isolation, reducing external sound without powered circuitry. With 16 ohm impedance and 112 decibel sensitivity, they reach loud volumes from portable sources while drawing minimal power. No battery means zero charging downtime and no wireless interference. Users who require active noise cancellation for loud environments will not find it here.
Six Ear Tip Sets Tangle-Free Cable
Six pairs of ear tips in small, medium and large sizes let each user find a secure fit that maintains the acoustic seal. The 3.8 foot Y-shaped cable is designed to resist tangles during movement. A 3.5mm jack provides broad device compatibility, though some phones may need a separate adapter. Listeners who prefer a detachable cable or inline remote will not have those options.
Highlights
- 10 mm drivers deliver rich bass and clear highs
- Wired 3.5 mm plug gives instant audio with no charging needed
- 33 dB passive isolation blocks background noise for focused listening
- 8 ft tangle-free cable stays manageable during daily use
- Six ear-tip sizes (S/M/L) ensure a secure, comfortable fit
Specifications
| Brand | Sephia |
|---|---|
| Model | SP3060 |
| Part Number | SP3060 |
| Type | In-Ear |
| Color | Black |
| Driver Unit | 10 millimeters |
| Frequency Response | 20000 hertz |
| THD | In Ear |
| Input Impedance | 16 ohms |
| Signal to Noise Ratio(SNR) | 112 decibels |
| Power Supply | false |
| Sensitivity | 112 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Weight | 16 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | 16 ohm |
| Microphone Frequency Response | 20000 hertz |
| Microphone Signal to Noise Ratio(SNR) | 112 decibels |
| Microphone Sensitivity | 112 decibels |
| Compatibility | Wireless |
| Features | sound_isolation, Tangle Free, Noise Control, Wired, In Ear, dynamic_driver, 16 ohm |
| Windows Vista | Certified for Windows Vista |
Questions about this item
How do I plug the SP3060 into a phone that has no 3.5 mm jack?
Use a USB-C or Lightning adapter with a 3.5 mm female port; the earbuds' plug is a standard 3.5 mm jack and needs no drivers.
What parts of the SP3060 wear out and need replacing?
The six pairs of silicone ear tips (S/M/L) are the only consumables; replace them when they lose seal or show tears to keep the 33 dB isolation.
When will the cable become the weak point during daily use?
The 3.8 ft Y-cord is tangle-free but not reinforced; expect strain at the plug and Y-split after months of pocket carry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black
$4.99
0.00005983BTC
In stock