We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB-C wired in-ear earbuds with microphone

No Sew

No Sew S1 USB-C In-Ear Headphones White

SKU CH-DGJT-GNPQB

Wired USB-C in-ear headphones with 10 mm drivers, built-in microphone and passive noise isolation for broad device compatibility

  • TypeIn-Ear
  • ColorWhite
  • Driver Unit10 millimeters
  • Frequency Response20Hz-40KHz
  • THDIn Ear
  • Input Impedance16 ohms
  • Direct USB-C connection works without a 3.5 mm adapter
  • Ergonomic in-ear shape blocks ambient sound for clearer audio
  • 10 mm drivers cover 20 Hz to 40 kHz for full-range detail
  • Built-in microphone handles calls with 100 dB sensitivity
  • Lightweight 0.018 kg design stays comfortable all day

USB-C In-Ear Headphones for Modern Phones

These wired earbuds connect directly to USB-C ports on recent iPhone, Samsung, Google and OnePlus devices without an adapter. The 10 mm drivers deliver stereo sound with a 20 Hz to 40 kHz frequency response and 100 dB sensitivity. They are built for listeners who want a simple plug-and-play audio solution on phones that lack a 3.5 mm jack.

Replacing Dongle-Based Earbuds

The integrated USB-C connector removes the need for a separate 3.5 mm dongle, reducing cable clutter and one potential failure point. The jump is worth it when your primary device has only a USB-C port and you prefer a single cable that carries both power and audio. Buyers who want wireless freedom or need a 3.5 mm plug for older gear should look elsewhere.

Simple Plug-and-Play Setup

Insert the USB-C plug into the port and audio routes automatically on most supported handsets. If no sound appears, open Settings, enable Developer Options and toggle off "Disable USB audio routing". Three pairs of silicone tips (including S and L sizes) let you seal the ear canal for isolation. The cable is not detachable, so a damaged wire means replacing the whole unit.

Highlights

  • Direct USB-C connection works without a 3.5 mm adapter
  • Ergonomic in-ear shape blocks ambient sound for clearer audio
  • 10 mm drivers cover 20 Hz to 40 kHz for full-range detail
  • Built-in microphone handles calls with 100 dB sensitivity
  • Lightweight 0.018 kg design stays comfortable all day

Specifications

BrandSoFunMoky
ModelSoFunMoky USB C Headphone, S1
Part NumberS1
TypeIn-Ear
ColorWhite
Driver Unit10 millimeters
Frequency Response20Hz-40KHz
THDIn Ear
Input Impedance16 ohms
Signal to Noise Ratio(SNR)100 decibels
Sensitivity100 decibels
ConnectorUSB
Ear CouplingSingle Ear
Weight0.018 kilograms
Noise Cancellingsound_isolation
Charge Time0 hours
Microphone Impedance16 ohm
Microphone Frequency Response20Hz-20KHz
Microphone Signal to Noise Ratio(SNR)100 decibels
Microphone Sensitivity100 decibels
Featuressound_isolation, Tangle Free, Button Control, push_button, Wired, In Ear, dynamic_driver, 16 ohm

Questions about this item

What size ear tips are included for the 10 millimetre drivers?

Two extra silicone ear tips in small and large sizes are included so you can choose the best seal for the in-ear fit.

How do I enable audio if the USB-C earbuds stay silent after plugging them in?

On Android, open Settings > Developer Options and turn off "Disable USB audio routing" to allow the digital audio signal through the USB-C port.

When should the silicone ear tips be replaced on these in-ear headphones?

Replace the tips when they lose elasticity, show cracks, or no longer create a tight seal that provides the stated sound isolation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.