We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

No Sew

No Sew PS104G 5-Port PoE+ Switch 4×30W 52W 250m Extend

SKU CH-252Z-MHS1Q

A compact PoE+ switch with four 30W ports, 52W budget, 250m Extend mode and easy smart management for IP cameras and APs

  • FormatDesktop
  • StandardsPassive PoE
  • Network MediaPoE
  • Network Management TypeUnmanaged
  • Uplink Ports8
  • Uplink InterfaceRJ45
  • Four PoE+ ports deliver up to 30W each with a 52W total budget
  • Extend mode pushes PoE and data up to 250m for remote endpoints
  • Easy smart management via web, app or software adds VLAN and QoS control
  • Fanless metal housing with built-in power supply runs silently and reliably
  • 4kV lightning protection helps safeguard connected equipment from surges

Compact PoE+ Switch for Surveillance

This five-port switch delivers power and data over a single Ethernet cable to IP cameras, wireless access points and VoIP phones. Four ports supply up to 30W each under the IEEE 802.3af/at standard with a 52W total power budget. One Gigabit uplink handles aggregated traffic from the powered devices.

Fanless Metal Build with Desktop or Wall Mount

A silent metal enclosure houses the integrated power supply, removing the need for external adapters and keeping noise out of offices or recording rooms. The unit can sit on a desk or be fixed to a wall, and LED indicators show link, speed and PoE status at a glance. Built-in 4kV lightning protection helps safeguard connected equipment from surges on long outdoor runs.

Extend Mode Trades Speed for Distance

Activating the Extend function pushes PoE and data up to 250m, but the port speed drops to 10/100Mbps while the feature is active. The switch supports 802.1Q VLAN, QoS, port mirroring, storm control and static MAC for basic traffic segmentation and prioritisation. Management is handled through a web interface, app or software, offering more control than a fully unmanaged switch but without the complexity of a full Layer 2 feature set.

Highlights

  • Four PoE+ ports deliver up to 30W each with a 52W total budget
  • Extend mode pushes PoE and data up to 250m for remote endpoints
  • Easy smart management via web, app or software adds VLAN and QoS control
  • Fanless metal housing with built-in power supply runs silently and reliably
  • 4kV lightning protection helps safeguard connected equipment from surges

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberPS104G
FormatDesktop
StandardsPassive PoE
Network MediaPoE
Network Management TypeUnmanaged
Uplink Ports8
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypePoE
Primary Port Count5
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypePoE
Management InterfacePoE
Management Feature5 Port PoE Switch, 1 Power Cord, User Manual
Jumbo Frames9216 bytes
Packet Forwarding Rate100 megabits_per_second
Buffer Memory768KB
IPv4 FeaturesNO SFP
Securitytrue
PoENo
SNMPNo
Layer1
Layer 2 FeaturesPoE, 100 megabits_per_second, 5
Layer 3 Features5 Port / 52W 4x PoE+
Module SupportNo
CablingPoE
PoE Power BudgetNO SFP
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption44 volts_of_direct_current
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.4 kilograms
Certificationtrue, not_applicable
Max Heat Dissipation52
Features5, PoE, 5 Port PoE Switch, 1 Power Cord, User Manual, 100 megabits_per_second, Metal, black
Package Contents5 Port PoE Switch, 1 Power Cord, User Manual

Questions about this item

What PoE standard does the PS104G use, and what is the practical per-port power cap?

The switch follows IEEE 802.3af/at PoE+ and limits each of the four PoE ports to 30W, with a 52W total budget shared across all ports.

What mounting options does the fanless metal housing provide?

The unit is designed for desktop or wall mounting and includes a built-in power supply, so no external adapter is required for either orientation.

How do I enable the 250m Extend mode, and what setting is commonly overlooked?

Toggle the Extend function on the switch to drop link speed to 10Mbps for longer runs; the step often missed is confirming the connected device negotiates 10Mbps instead of 100Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.