We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

No Sew

No Sew ProSafe 1-to-4 Gigabit network switch

SKU CH-AYAX-H4CM5

Expands one Ethernet port into four RJ45 outputs supporting 1000Mbps speeds with USB-C power for stable operation

  • StandardsPassive PoE
  • Network MediaRJ45
  • Uplink Ports8
  • Uplink InterfaceRJ45
  • Uplink Speed10/100 Mbps
  • Uplink Speed/TypeRJ45
  • Expands one RJ45 input into four output ports for up to four wired devices
  • Supports up to 1000Mbps data transfer for fast file transfers and low-latency gaming
  • Works with Cat8, Cat7, Cat6, Cat5e and Cat5 cables without rewiring
  • USB-C 5V power input maintains stable operation during continuous use
  • Plug-and-play setup requires no drivers or configuration to start immediately

1-to-4 Gigabit network switch

The No Sew ProSafe 1-to-4 Gigabit network switch expands a single RJ45 Ethernet input into four RJ45 output ports. It supports up to 1000Mbps data transfer for fast file transfers, stable video streaming, and low-latency gaming. The unit includes a USB-C power cable for reliable 5V operation. Setup is plug-and-play with no drivers or configuration required.

Home office and gaming expansion

This switch suits desktops, laptops, printers, smart TVs, and game consoles needing wired connections in home offices or entertainment centres. It reduces Wi-Fi congestion by keeping key devices on Ethernet using existing Cat8, Cat7, Cat6, Cat5e, or Cat5 cabling. Builders who need more than four additional ports or require managed features such as SNMP support should look at a different solution.

1000Mbps port speed decides fit

The primary port speed of 1000Mbps determines whether this switch matches your network performance needs. Jumbo frame support up to 9216 bytes and a 768KB buffer assist throughput for large data packets. Packet forwarding rate is rated at 1 gigabits_per_second. Verify that your router, modem, and connected device adapters also support gigabit speeds to achieve the stated rate.

Highlights

  • Expands one RJ45 input into four output ports for up to four wired devices
  • Supports up to 1000Mbps data transfer for fast file transfers and low-latency gaming
  • Works with Cat8, Cat7, Cat6, Cat5e and Cat5 cables without rewiring
  • USB-C 5V power input maintains stable operation during continuous use
  • Plug-and-play setup requires no drivers or configuration to start immediately

Specifications

SeriesProSafe
Part Number1 to 4
StandardsPassive PoE
Network MediaRJ45
Uplink Ports8
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeRJ45
Primary Port Count4
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeRJ45
Management InterfaceRJ45
Jumbo Frames9216 bytes
Packet Forwarding Rate1 gigabits_per_second
Buffer Memory768KB
IPv4 Features1 to 4
PoENo
SNMPNo
Layer 2 FeaturesRJ45, 1 gigabits_per_second, 4
Layer 3 Features1 to 4
CablingRJ45
PoE Power Budget1 to 4
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption2 amps, 5 volts
Dimensions14.33in W x 12.83in H x 9.06in D
Weight1 ounces
Features4, RJ45, 1 gigabits_per_second, Aluminum, Ethernet Splitter 1 to 4

Questions about this item

Will this switch work with my older Cat5 cables and 100 Mbps router?

Yes, the switch is compatible with Cat5 cables and will operate at 10/100 Mbps speeds when connected to a 100 Mbps router, though gigabit speeds require Cat5e or higher cabling and gigabit-capable equipment.

How can I verify the switch is running at full gigabit speed after connecting it?

Check the LED indicators on each port; a solid or blinking light typically shows link speed, and you can confirm 1000 Mbps negotiation in your computer's network adapter settings or router status page.

Does the box include a power adapter or only the USB-C cable?

The package includes the 1-to-4 Ethernet splitter, a USB-C power cable, and a user manual; a 5V USB power adapter is not included and must be purchased separately if you do not have a spare USB port or charger.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.