No Sew
No Sew M02-T2 Magnetic Dashboard Phone Mount 360° 3.1x2.2x2.7 in
A magnetic dashboard mount holding phones with N52 magnets, 360° rotation and 3M VHB adhesive in a 3.1x2.2x2.7 in footprint
- TypeDashboard
- ColorSignal-Black
- Compatible Phone ManufacturerSmartphones
- Compatible Phone ModelSmartphones
- Specifications3.1 in x 2.2 in x 2.7 in
- FeaturesMagnetic
- Strong N52 magnets hold phone securely
- 360° rotation lets you set any viewing angle
- 3M VHB adhesive bonds firmly to flat dashboards
- Compact 3.1x2.2x2.7 in design keeps controls accessible
- Works with iPhone 14 13 12 11 and Samsung Galaxy models
Compact Dashboard Mount
The No Sew M02-T2 is a magnetic dashboard phone holder measuring 3.1 x 2.2 x 2.7 inches. It uses N52 magnets to secure smartphones in a fixed position while keeping controls and ports accessible. The low-profile design suits drivers who want a minimal footprint on the dash.
3M VHB Adhesive Base
Installation requires a clean, flat surface and firm pressure for at least ten seconds. The 3M VHB tape needs 24 hours to cure before use, and the supplier advises an interior temperature above 68 degrees during application. The base includes horizontal grooves that allow slight bending to match minor dashboard contours.
Best for Flat Dashboards
This mount works well for owners of compatible smartphones who have a flat, non-leather dashboard and can wait a day for full adhesion. It is not suitable for curved, leather or vinyl surfaces, nor for anyone needing immediate use after fitting.
Highlights
- Strong N52 magnets hold phone securely
- 360° rotation lets you set any viewing angle
- 3M VHB adhesive bonds firmly to flat dashboards
- Compact 3.1x2.2x2.7 in design keeps controls accessible
- Works with iPhone 14 13 12 11 and Samsung Galaxy models
Specifications
| Brand | APPS2Car |
|---|---|
| Model | M02-T2 |
| Type | Dashboard |
| Color | Signal-Black |
| Compatible Phone Manufacturer | Smartphones |
| Compatible Phone Model | Smartphones |
| Specifications | 3.1 in x 2.2 in x 2.7 in |
| Features | Magnetic |
Questions about this item
Will the 3M VHB adhesive need replacing if the dashboard gets hot?
The adhesive requires installation above 68 °F and 24 hours to cure; extreme heat later can weaken the bond, so the mount may need re‑affixing with fresh tape.
What stops the phone from sliding off during hard cornering?
N52 magnets provide the holding force; the limit is the magnetic grip itself, which can be overcome by sudden high‑G movements.
Does the mount rattle or get hot when left on the dash all day?
No moving parts means no rattle; the black finish absorbs sunlight so the base can become warm, but there are no electronics to generate heat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



