No Sew LR1130 AG10 1.5V Alkaline Button Cell Batteries 10 Pack

What this pack is

This pack contains ten LR1130 alkaline button cells, each rated at 1.5 volts. They are direct replacements for devices that specify 1130, AG10, DLR1130, SR1130, L1131, LR54, 389, 189-1, 389A, 390A, D189, 189, G10, G10A, GP89A, KA54, RW89 or V10GA. The cells arrive in a sealed blister pack with a three-year shelf life. They are not rechargeable and are not suited for high-drain applications.

Alkaline voltage limits

Alkaline chemistry delivers a nominal 1.5 volts that declines steadily as the cell discharges. Devices that require a flat voltage curve or a higher cut-off voltage may stop working before the cell is fully depleted. The chemistry also limits peak current, so the cells are unsuitable for loads that demand sustained high power. Buyers who need a stable voltage throughout the full capacity or who need rechargeable cells should choose a different chemistry.

The deciding specification

The critical figure is the 1.5 volt nominal voltage combined with the LR1130 form factor. If your equipment lists any of the compatible model numbers shown above, these cells will fit and provide the correct voltage. If the device calls for a 3 volt lithium coin cell such as a CR1130 or a rechargeable 1.2 volt variant, this pack will not work.