No Sew
No Sew LD001Z 12 V 1 A power adapter 5.5×2.1 mm 1.5 m cable
Supplies 12 V at 1 A through a 5.5 × 2.1 mm barrel plug on a 1.5 m cable, UL-listed with Level VI efficiency
- Type9 V
- Changer TypeUSB C Charger
- ColorBlack
- Cable Length5 in.
- Specifications12 watts, 12 volts, 1 amps, 120 volts, 2.1x5.5mm, 60 hertz,
- Connector A2.1x5.5mm
- Level VI efficiency reduces power consumption
- Universal AC 100-240 V 50/60 Hz input suits global mains
- Stable 12 V DC output up to 1000 mA for low-power devices
- 5 m cable with 2.1×5.5 mm centre-positive plug fits many units
- ETL certified to UL 62368-1 with short-circuit and over-current protection
12 V 1 A barrel adapter
This 12 V 1 A power adapter supplies up to 12 W to devices that use a 2.1 mm × 5.5 mm centre-positive barrel jack. It accepts AC 100–240 V at 50/60 Hz and meets Level VI energy-efficiency requirements. The 1.5 m cable and UL 62368-1 certification make it suitable for indoor use with LED strips, cameras, Bluetooth speakers and routers. Class 2 transformer construction provides short-circuit, over-voltage and over-current protection.
Indoor low-power devices only
The adapter suits equipment that draws 1 A or less at 12 V DC, such as LED lighting, security cameras, small audio gear and network routers. It is not for hardware that needs more than 12 W, higher voltage, a different barrel size or a locking connector. Outdoor or high-temperature installations are also outside its rated use. Buyers who need adjustable voltage, USB-C output or medical-grade approval should look elsewhere.
12 W continuous headroom
At the full 1 A rating the unit delivers 12 W continuously with low heat and silent operation. The 24 AWG cord and Level VI design keep losses small across the 100–240 V input range. Headroom ends when the load exceeds 1 A or when the connected device requires a voltage other than 12 V DC. The 1.5 m cable length sets the practical placement limit from the mains outlet.
Highlights
- Level VI efficiency reduces power consumption
- Universal AC 100-240 V 50/60 Hz input suits global mains
- Stable 12 V DC output up to 1000 mA for low-power devices
- 5 m cable with 2.1×5.5 mm centre-positive plug fits many units
- ETL certified to UL 62368-1 with short-circuit and over-current protection
Specifications
| Series | LD001Z |
|---|---|
| Model | LD001Z |
| Part Number | LD001Z |
| Type | 9 V |
| Changer Type | USB C Charger |
| Color | Black |
| Cable Length | 5 in. |
| Specifications | 12 watts, 12 volts, 1 amps, 120 volts, 2.1x5.5mm, 60 hertz, type_a_2pin_na, 0, LD001Z |
| Connector A | 2.1x5.5mm |
| Connector B | 2.1x5.5mm |
| Cable Jakcet Type | Plastic |
| Connector Style | Male |
| Features | 2.1x5.5mm, Corded Electric, 0, AC/DC, 12 watts |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Quantity | 1 |
| Package Contents | 1 |
| Disclaimer | 1 year, not_applicable |
Questions about this item
What input voltage range must the mains supply provide for this LD001Z adapter to operate?
The adapter accepts AC 100-240 V at 50/60 Hz, so it works on standard household mains worldwide without a separate voltage selector.
My existing device uses a 5.5 mm outer / 2.1 mm inner barrel jack — will this adapter’s plug fit and supply the correct polarity?
Yes, the cord terminates in a 5.5×2.1 mm centre-positive barrel connector that matches the common polarity used by most 12 V LED strips, cameras and routers.
After plugging it in, how can I verify the LD001Z is delivering a stable 12 V output under load?
Measure the barrel plug with a multimeter set to DC volts; a reading close to 12 V while the device is powered confirms the adapter is regulating correctly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
