No Sew
No Sew EP-06 Wired Earbuds Blue 10mm 3.5mm 1.5m 6 Tips
Wired in-ear earbuds with 10mm drivers, built-in microphone, 3.5mm plug, 1.5m cable and six silicone tips for a secure fit
- TypeIn-Ear
- ColorBlue
- Driver Unit10 millimeters
- Frequency Response5Hz-20KHz
- THDIn Ear
- Input Impedance16 ohms
- Clear calls with built-in microphone for hands-free use
- Deep bass from 10 mm dynamic drivers
- Noise isolation blocks background sound
- Secure fit with six silicone ear-tip sizes
- Universal 3.5 mm jack works with many devices
What the earbuds are and who they suit
The No Sew EP-06 wired earbuds deliver stereo sound through 10 mm dynamic drivers and a 3.5 mm gold-plated plug. They are aimed at listeners who want a simple, plug-and-play connection to smartphones, laptops, tablets or consoles without adapters or batteries. The pack includes six pairs of silicone tips so most ear shapes can find a secure fit.
Passive isolation and cable handling
The in-ear design relies on physical seal rather than active circuitry to reduce ambient noise such as wind or traffic. A 1.5 m Y-shaped TPE cable resists tangling and adds minimal weight at 16 grams. With 16 ohm impedance and 95 dB sensitivity the earbuds reach comfortable volumes from portable sources while drawing very little power.
Sustained listening comfort and microphone clarity
The 45° angled nozzles follow the ear canal to stay stable during long sessions, and the six tip sizes let users maintain the seal that preserves bass response over time. The built-in condenser microphone operates from 20 Hz to 20 kHz with 95 dB signal-to-noise ratio, keeping voice intelligible during extended calls or gaming marathons. A single multifunction button handles playback and call control without volume keys.
Highlights
- Clear calls with built-in microphone for hands-free use
- Deep bass from 10 mm dynamic drivers
- Noise isolation blocks background sound
- Secure fit with six silicone ear-tip sizes
- Universal 3.5 mm jack works with many devices
Specifications
| Brand | MORMOQUE |
|---|---|
| Model | EP-06 3.5mm wired earbuds/Blue, EP-06, EP-06 BLUE |
| Part Number | EP-06 BLUE |
| Type | In-Ear |
| Color | Blue |
| Driver Unit | 10 millimeters |
| Frequency Response | 5Hz-20KHz |
| THD | In Ear |
| Input Impedance | 16 ohms |
| Signal to Noise Ratio(SNR) | 95 decibels |
| Sensitivity | 95 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Cord Length | User Manual |
| Weight | 16 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | No |
| Microphone Impedance | 16 ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 95 decibels |
| Microphone Sensitivity | 95 decibels |
| Features | sound_isolation, Volume Control, remote, Wired, In Ear, dynamic_driver, 16 ohm, Ear Cushions |
| Package Contents | Ear Cushions, Silicone ear cushions, User Manual |
Questions about this item
How do I insert the 45° angled nozzle earbuds with the 6 silicone tips so they seal properly?
Choose the tip size that fills your ear canal, push the angled nozzle in while twisting slightly until the seal feels secure, then route the 1.5 m Y-shaped cord behind your neck.
Which parts of the EP-06 will wear out first and need replacement?
The 6 silicone ear tips and the TPE cable jacket are the consumables; the gold-plated 3.5 mm plug and 10 mm drivers are not user-serviceable.
At what volume level does the 16 Ω / 95 dB sensitivity combination start to distort on long sessions?
The driver is rated for 5 mW maximum input; sustained power above that level will cause audible distortion before thermal limits are reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
$16.99
0.00020454BTC
In stock
usbroway
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio
$38.99
0.0004694BTC
In stock