We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal box with eight front RJ45 ports, two uplinks, AC cable included

No Sew

No Sew 8-port Gigabit PoE+ switch 120W 2 uplink VLAN extend

SKU CH-CGM3-EG0RS

Eight gigabit PoE+ ports and two gigabit uplinks deliver 120 W total power with VLAN isolation and 250 m extend mode in a fanless metal housing

  • StandardsPassive PoE
  • Network MediaRJ45
  • Network Management TypeUnmanaged
  • Uplink InterfaceRJ45
  • Uplink Speed10/100 Mbps
  • Uplink Speed/TypeRJ45
  • 8 PoE+ ports deliver up to 30W each for IP cameras
  • 120W built-in power supply eliminates external injectors and includes AC cable
  • VLAN isolation mode separates downlink ports to reduce broadcast storms
  • Extend mode reaches 250 m for long cable runs in warehouses
  • Fanless metal housing with 4KV surge protection runs silently in tough environments

8-port PoE+ switch for IP cameras

This unmanaged Gigabit switch provides eight PoE+ ports and two Gigabit uplinks for NVR or router backhaul. It delivers up to 30W per port within a 120W total budget using IEEE 802.3af/at. The fanless metal housing enables silent operation in noise-sensitive areas. A built-in power supply and AC cable remove the need for external injectors.

Practical limits of unmanaged PoE switching

The switch operates at Layer 1 with no SNMP, VLAN tagging, or traffic prioritisation beyond the hardware VLAN isolation mode. Uplink ports run at Gigabit speed while downlink ports negotiate at 10/100/1000 Mbps. Jumbo frames up to 9216 bytes are supported for larger packets. Passive PoE or 24V devices will not receive power and need a separate splitter or adapter.

120W total PoE budget decides camera count

Eight ports share a 120W ceiling, so the number of powered cameras depends on each unit's draw rather than the port count alone. Extend mode pushes data and power to 250 metres over suitable cabling for perimeter runs. The 48V active PoE output complies with 802.3af/at standards for compatible IP cameras and NVRs. Non-PoE devices pass data only without power.

Highlights

  • 8 PoE+ ports deliver up to 30W each for IP cameras
  • 120W built-in power supply eliminates external injectors and includes AC cable
  • VLAN isolation mode separates downlink ports to reduce broadcast storms
  • Extend mode reaches 250 m for long cable runs in warehouses
  • Fanless metal housing with 4KV surge protection runs silently in tough environments

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberSG10P
StandardsPassive PoE
Network MediaRJ45
Network Management TypeUnmanaged
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeRJ45
Primary Port Count8
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeRJ45
Management InterfaceRJ45
Management Feature1x(8+2) Active PoE Switch,1xAC Power Cable,1xUser Manual
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 megabits_per_second
SNMPNo
Layer1
Layer 2 FeaturesRJ45, 1000 megabits_per_second, 8
Layer 3 Features10 Gigabit Ports/120W 8xPoE+
CablingRJ45
PoE Ports48 x PoE
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption48 volts
Dimensions14.33in W x 12.83in H x 9.06in D
Certificationnot_applicable
Max Heat Dissipation120 watts
Features8, RJ45, 1x(8+2) Active PoE Switch,1xAC Power Cable,1xUser Manual, 1000 megabits_per_second, Aluminum, black- Gigabit
Package Contents1x(8+2) Active PoE Switch,1xAC Power Cable,1xUser Manual

Questions about this item

Should I pick the 8-port PoE+ model or a version with fewer PoE ports?

This model provides eight PoE+ ports with a 120 W total budget and two extra Gigabit uplinks; choose it when you need to power up to eight cameras or access points from one switch.

What does the 120 W PoE budget mean when I connect several IP cameras?

The switch can deliver up to 30 W on any single PoE+ port, but the total across all eight ports cannot exceed 120 W, so you must add the power draw of every connected camera and stay within that limit.

The uplinks are listed as Gigabit — what speed do they actually run at?

Both uplink ports operate at 10/100/1000 Mbps, giving a full Gigabit backhaul to your NVR or router without bottlenecking the eight PoE ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.