No Sew
No Sew 2 Pack 3.5mm Wired In-Ear Headphones White
Two-pack of 3.5 mm wired in-ear earbuds with 10 mm drivers, in-line microphone, volume control and passive noise isolation
- TypeIn-Ear
- ColorWhite
- Driver Unit10 millimeters
- THDIn Ear
- Input Impedance16 ohms
- Connector3.5mm
- Comfortable secure fit suits most ear shapes
- 10 mm drivers deliver 360 degree stereo sound
- Built-in mic with volume control enables hands-free calls
- Passive noise isolation blocks ambient sound
- 0 m cable with 3.5 mm plug fits many devices
What you get
This pack contains two wired in-ear headphones with a 3.5mm plug. They are aimed at listeners who want a simple, plug-and-play audio solution for phones, tablets or laptops that still have a headphone jack. Each earpiece uses a 10mm dynamic driver and a 16 ohm impedance. The cable is 1.0m long with a tolerance of ±0.15m.
Inline remote and microphone
A three-button control on the cable handles play or pause with one press, next track with two presses and previous track with three presses. The built-in microphone supports hands-free calls and the volume control adjusts levels without touching the connected device. Passive noise isolation comes from the in-ear fit rather than active circuitry.
Wired 3.5mm connection limits
Audio only works with devices that provide a 3.5mm stereo socket; phones or tablets without that port cannot use these earbuds directly. The frequency response is quoted as 20Hz-20,000Hz with a sensitivity of 100dB at 1KHz. Rated power is 3mW and maximum power capability is 30mW. The package includes a pouch sized L9*H8.5CM for storage.
Highlights
- Comfortable secure fit suits most ear shapes
- 10 mm drivers deliver 360 degree stereo sound
- Built-in mic with volume control enables hands-free calls
- Passive noise isolation blocks ambient sound
- 0 m cable with 3.5 mm plug fits many devices
Specifications
| Brand | Kogwjte |
|---|---|
| Model | language _ tag, Wired Buds, Kogwjte |
| Part Number | Kogwjte |
| Type | In-Ear |
| Color | White |
| Driver Unit | 10 millimeters |
| THD | In Ear |
| Input Impedance | 16 ohms |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Noise Cancelling | Passive |
| Wireless Type | IR |
| Microphone Impedance | 16 ohm |
| Features | passive_noise_cancellation, Retractable, Volume Control, touch, Wired, In Ear, dynamic_driver, 16 ohm |
Questions about this item
Will the 10 mm driver units or the 3.5 mm plugs need replacing after heavy daily use?
The 10 mm dynamic drivers and 3.5 mm stereo plugs are fixed components; no user-replaceable parts are mentioned.
What limits continuous listening — the 3 mW rated power or the 30 mW power capability?
The 3 mW rated power is the normal operating level; sustained output above that risks distortion or driver stress.
How warm do the earbuds get and how much power do they draw from the 3.5 mm jack during all-day use?
They draw only a few milliwatts from the jack and remain cool; passive noise isolation adds no active heat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



