We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sewer inspection kit with 22mm IP68 camera head, 7 inch monitor, 20m cable in padded case

No.21

No.21 22mm IP68 512Hz Sewer Camera 20m 7" Monitor

SKU CH-W3DM-6YGJW

A 22mm IP68 camera with 12 LEDs and 512Hz locator on a 20m cable connects to a 7-inch monitor for pipe inspection

  • Type20M
  • Size/Dimensions20M

Options Cable Length 20m/65ft

  • Inspect hard-to-reach pipes with a 22 mm camera head and 20 m cable
  • Locate faults precisely using the 512 Hz transmitter built into the probe
  • View clear 1000 TVL images on the 7-inch monitor with auto self-leveling
  • Illuminate dark drains with 12 adjustable LEDs behind an IP68-rated stainless-steel lens
  • Transport the full kit safely in a padded case with a leather sun visor

Purpose and Users

The No.21 sewer inspection system pairs a 22mm IP68 camera head with a 7" LCD monitor for viewing inside drain lines up to 20m long. It is built for plumbers, contractors and property owners who need to locate blockages or damage without opening walls. The kit includes a padded case and leather sun visor for outdoor use. Buyers who need longer cable runs or wireless recording should look elsewhere.

Thermals and Power in Normal Use

The stainless-steel camera housing carries an IP68 rating and 12 adjustable LEDs for illumination in dark pipes. A 512Hz transmitter helps pinpoint the probe position from above ground during routine inspections. Auto self-leveling keeps the picture upright while the operator advances the 20m push cable. No figures for power draw or operating temperature are supplied.

Behaviour Under Sustained Load

The 1000TVL sensor and 145° viewing angle maintain a clear image during extended pipe surveys. Continuous LED output and transmitter operation are supported by the included monitor unit for long sessions. The rugged #304 steel probe and padded case protect the kit during repeated daily use. No data on thermal throttling or battery endurance under continuous load is provided.

Highlights

  • Inspect hard-to-reach pipes with a 22 mm camera head and 20 m cable
  • Locate faults precisely using the 512 Hz transmitter built into the probe
  • View clear 1000 TVL images on the 7-inch monitor with auto self-leveling
  • Illuminate dark drains with 12 adjustable LEDs behind an IP68-rated stainless-steel lens
  • Transport the full kit safely in a padded case with a leather sun visor

Specifications

Type20M
Size/Dimensions20M

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I set up the 22mm IP68 camera on the 20m cable with the 7" monitor?

Connect the camera probe to the cable reel, plug the reel into the monitor, power on the monitor, and fit the leather sun visor before lowering the probe into the pipe.

Which parts of the 512Hz locator system will need replacement after heavy use?

The 12 adjustable LED lights on the camera head and the cable sheath are the main wear items; the #304 stainless-steel camera housing and monitor are built for long service.

What limits continuous inspection time with the 1000TVL camera and 145° viewing angle?

Battery life on the 7" monitor typically limits a session; the IP68 camera and 512Hz transmitter run as long as the monitor stays powered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.