We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 10 ft USB 3.0 cable with Type-A and Type-B male nickel-plated connectors

Nlp Comprehensive

Nlp Comprehensive USB3-AB-10ST 10 ft USB 3.0 A Male to B Male wire cap connector

SKU CH-NPCT-8GB0T MPN USB3-AB-10ST

A 10 ft USB 3.0 cable with Type-A and Type-B male connectors, supporting 4.8 Gbps throughput and backwards compatibility with USB 2.0 devices

  • Color MappingMulti Colored
  • TypeWire Connectors
  • SuperSpeed 3.0 throughput reaches 4.8 Gbps for fast data transfers
  • Backwards compatible with USB 2.0 devices at 480 Mbps speeds
  • Shielded twisted-pair construction reduces electromagnetic interference
  • Nickel-plated connectors resist corrosion for lasting signal integrity
  • 10 ft length connects printers and peripherals across the workspace

USB 3.0 A-to-B cable for printers

This ten-foot cable connects a USB 3.0 Type-B printer or peripheral to a USB 3.0 Type-A host port. It supports simultaneous SuperSpeed and legacy data exchanges. The nickel-plated connectors and shielded twisted-pair construction reduce electromagnetic interference. It is built for users who need a reliable link between modern computers and compatible print devices.

Sustained throughput with backward compatibility

When used with a USB 3.0 host and device, the cable delivers up to 4.8 Gbps throughput. It maintains that rate during extended transfers rather than only in short bursts. The design also handles USB 2.0 traffic at 480 Mbps without switching cables. This makes it suitable for long print jobs or bulk data moves that last several minutes.

Shielded construction for stable operation

The shielded twisted-pair wiring resists external noise that can corrupt data on long runs. Nickel-plated contacts resist oxidation so resistance stays low over time. The cable draws only the bus power required by the connected device, adding no extra load. Heat and audible noise remain negligible during normal printing or file-transfer sessions.

Highlights

  • SuperSpeed 3.0 throughput reaches 4.8 Gbps for fast data transfers
  • Backwards compatible with USB 2.0 devices at 480 Mbps speeds
  • Shielded twisted-pair construction reduces electromagnetic interference
  • Nickel-plated connectors resist corrosion for lasting signal integrity
  • 10 ft length connects printers and peripherals across the workspace

Specifications

BrandCOMPREHENSIVE CABLE
Color MappingMulti Colored
TypeWire Connectors
Shipping weight1.36 kg
Package size254 × 76 × 25 mm

Questions about this item

Does the 10 ft USB 3.0 cable generate noticeable heat or draw extra power during all-day transfers?

The cable is passive shielded twisted-pair wiring with nickel-plated connectors; it carries only the bus power negotiated between the host and the peripheral, so it adds no active heat or power draw of its own.

What must my device already provide for this Type B Male to Type A Male cable to function?

The peripheral needs a USB 3.0 Type B port and the host a USB 3.0 Type A port; both must support the SuperSpeed lane for the 4.8 Gbps rate, though the cable will fall back to 480 Mbps on USB 2.0 ports.

Will this 10 ft cable work reliably with my older USB 2.0 printer and a USB 3.0 laptop port?

Yes — the cable is fully backwards compatible; it will negotiate USB 2.0 speeds of 480 Mbps with the printer while the laptop port remains in USB 3.0 mode, and the shielding prevents interference over the full 10 ft length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.