Nlp Comprehensive
Nlp Comprehensive LC-LC-OM3-1M 0.45m 10Gb LC/LC Duplex 50/125 OM3 fibre optic cable
A 0.45 metre duplex multimode fibre patch cable with LC connectors for 10 Gigabit links up to 300 metres
- TypeConsumer Electronics
- Supports 10 Gigabit speeds up to 300 metres
- OM3 fibre delivers 2000 MHz/km bandwidth at 850nm
- LC duplex connectors ensure reliable 50/125 multimode links
- 45 metre length fits tight rack spaces
- Backward compatible with existing 50/125 equipment
Nlp Comprehensive OM3 Duplex Patch Cable
This OM3 multimode fibre patch cable uses LC duplex connectors and a 50/125 micron core/cladding diameter. It is built for 10 Gigabit Ethernet links in data centres, enterprise networks and high-speed campus backbones. The 0.45 metre length suits short rack-to-rack or panel-to-panel runs.
Passive Fibre — No Thermals, Noise or Power
As a passive optical cable it generates no heat, emits no noise and draws no electrical power. Thermal load, acoustic profile and power budget are therefore irrelevant to deployment planning. Installation adds no cooling or power-supply overhead to the rack.
Upgrades Legacy 50/125 Multimode Links
The cable replaces older 50/125 multimode patch cords that cannot guarantee 10 Gigabit performance over the required distance. It is not suited for single-mode infrastructure, long-haul spans beyond 300 metres at 850 nm, or environments that demand armoured or outdoor-rated jackets.
Highlights
- Supports 10 Gigabit speeds up to 300 metres
- OM3 fibre delivers 2000 MHz/km bandwidth at 850nm
- LC duplex connectors ensure reliable 50/125 multimode links
- 45 metre length fits tight rack spaces
- Backward compatible with existing 50/125 equipment
Specifications
| Brand | COMPREHENSIVE CONNECTIVITY COMPANY |
|---|---|
| Type | Consumer Electronics |
| Shipping weight | 0.02 kg |
| Package size | 51 × 51 × 51 mm |
Questions about this item
How do I install the LC/LC duplex fibre cable and which step is commonly missed?
Align the LC connector key with the port notch, push until the latch clicks, then verify both duplex channels show link light — the step often skipped is confirming the second channel is seated.
What maintenance or replacement will this OM3 patch cable need over time?
Inspect end-faces with a fibre scope before each reconnect; clean with a dry click-to-clean tool if contamination appears, and replace the cable if insertion loss exceeds the OM3 3.5 dB/km budget at 850 nm.
What limit appears first when running sustained 10 Gb traffic over this 0.45 m OM3 link?
The 2000 MHz/km EMB rating allows 10 Gb up to 300 m, so on this short run the practical limit is connector cleanliness and transceiver heat rather than fibre bandwidth.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



