We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black EVA speaker stand mounting plates with 35 mm pole mount

NiuNyuNeu 034x2 Pair of Speaker Stand Mounting Plates

SKU CH-VPJD-6W0HA

Two mounting plates convert standard 35 mm speaker poles into 23 cm monitor platforms with non-slip EVA pads

  • FinishBlack
  • MaterialsEthylene Vinyl Acetate
  • Specification034x2, Ethylene Vinyl Acetate, Black, Pole Mount, Non-Slip
  • FeatureNon-Slip
  • Dimension72"
  • Converts a PA speaker into a monitor stand with 9" x 9" top plate
  • Fits standard 35 mm speaker pole for secure mounting
  • 2 mm non-slip EVA pads protect studio monitors from sliding
  • Simple disassembly allows quick transport between venues
  • Pair of plates supports dual-monitor setups for stereo mixing

Pair of Speaker Stand Mounting Plates

This pair of mounting plates converts standard speaker poles into monitor stands for studio use. Each plate measures 23 by 23 centimetres and fits a 35 millimetre pole. The set includes two plates for stereo or multi-monitor configurations. Designed for audio engineers and home-studio builders needing flexible monitor placement.

Non-slip EVA pads and removable design

Two-millimetre EVA pads on the top surface prevent monitors or laptops from sliding during playback. The plates detach quickly from the pole for transport or reconfiguration between sessions. No tools are required to add or remove the platform from an existing stand. This keeps the setup adaptable for changing studio layouts.

Simple installation on 35 millimetre poles

Mounting is achieved by sliding the 40 millimetre centre hole over a standard 1.4 inch speaker pole and tightening. The lightweight Ethylene Vinyl Acetate construction keeps added mass low. Installers must verify their pole diameter matches 35 millimetres; oversized or undersized poles will not secure properly. No hardware beyond the pole itself is included.

Highlights

  • Converts a PA speaker into a monitor stand with 9" x 9" top plate
  • Fits standard 35 mm speaker pole for secure mounting
  • 2 mm non-slip EVA pads protect studio monitors from sliding
  • Simple disassembly allows quick transport between venues
  • Pair of plates supports dual-monitor setups for stereo mixing

Specifications

BrandNiuNyuNeu
Model034x2
Part Number034x2
FinishBlack
MaterialsEthylene Vinyl Acetate
Specification034x2, Ethylene Vinyl Acetate, Black, Pole Mount, Non-Slip
FeatureNon-Slip
Dimension72"

Questions about this item

Will the 2 mm EVA non-slip pads on the 23 cm plates need replacing after heavy use?

The 2 mm EVA pads are fitted to each 23 cm top plate; they can be peeled off and replaced with similar thickness material if they wear down.

What load limit appears first when a monitor sits on the 40 mm centre hole all day?

The 40 mm mounting hole in the 23 cm plate transfers weight to the 35 mm pole, so the pole’s own rating becomes the limiting factor.

Do the black EVA pads or the 35 mm pole joint generate noticeable heat or noise during continuous operation?

The EVA pads and 35 mm pole mount are passive parts; they produce no heat and no audible noise under normal studio use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.