We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nisi

Nisi 62mm PRO Nano 3-Stop IRND8 camera filter

SKU CH-NCKJ-7B0XX

A 62mm circular filter combining 3-stop neutral density with infrared attenuation in nano-coated glass

  • 3-stop density cuts bright light for longer exposures
  • 9 optical density reduces light by three stops
  • IR attenuation blocks infrared to keep colours accurate
  • Nano-coated glass repels water oil and resists scratches
  • Ultra-thin 62 mm brass ring allows filter stacking

62mm IRND8 filter for long exposures

The NiSi 62mm PRO Nano IRND8 is a solid neutral-density filter that reduces light by three stops with a density of 0.9. It uses nano-coated optical glass mounted in an ultra-thin brass ring to avoid vignetting on wide-angle lenses. The coating repels water, oil and scratches while maintaining neutral colour balance. Photographers who need precise exposure control for motion blur or shallow depth of field in bright conditions will find it suited to their workflow.

0.9 density gives three stops of reduction

At 0.9 optical density the filter cuts light by three stops, which is enough for smoothing water, blurring clouds or opening the aperture one to two stops in midday sun. It runs out when scenes demand four stops or more, such as multi-minute exposures or very fast lenses at base ISO in direct sunlight. The front 62mm thread allows stacking with a second filter, though each extra layer increases the risk of corner darkening on ultra-wide focal lengths.

Replaces standard ND filters without IR control

Standard neutral-density filters often leak infrared light, creating a magenta cast during long exposures that is difficult to correct in post. This IRND8 blocks infrared across the frame, removing that colour shift at the source. The upgrade is worth it when you shoot exposures longer than a few seconds or use cameras with high infrared sensitivity, but unnecessary for short exposures where IR contamination stays below visible thresholds.

Highlights

  • 3-stop density cuts bright light for longer exposures
  • 9 optical density reduces light by three stops
  • IR attenuation blocks infrared to keep colours accurate
  • Nano-coated glass repels water oil and resists scratches
  • Ultra-thin 62 mm brass ring allows filter stacking

Specifications

No published specifications for this item yet.

Questions about this item

Will the 62mm front thread on this IRND8 filter let me stack my existing 62mm circular polariser without vignetting?

The filter has matched 62mm threads on both faces and an ultra-thin aluminium frame, so a 62mm polariser screws on directly and the slim profile reduces vignetting risk on wide lenses.

How can I verify the 3-stop density is neutral after mounting the filter?

Shoot a grey card or white wall in raw, then check RGB histograms; equal channel levels confirm the nano-coated glass adds no colour cast while cutting light by 0.9 density.

Does the box include a protective case for the 62mm glass, or must I buy one separately?

The supplied facts list only the round nano-coated glass filter with its brass ring; no pouch or hard case is mentioned, so plan to purchase storage separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.