Nippon Labs
Nippon Labs USB3-3MM-BK-2P 3 ft USB 3.0 A Male to A Male cable 2 pack
Two 3 ft USB 3.0 A Male to A Male cables delivering 5 Gbps data transfer with backward compatibility to USB 2.0 and 1.1
- TypeUSB 3.0
- Connector TypeUSB A to USB A
- ColorBlack
- Connector Number2
- Terminal GenderMale to Male
- FeaturesAbout USB3.0 Type A Male to Type A Male - The 3.0 specificat
- USB 3.0 delivers 5 Gbps transfer speed
- Two cables included for multiple connections
- A Male to A Male connects compatible devices
- Three-foot length suits desktop setups
- Backward compatible with USB 2.0 and 1.1
Cable kit · two 3 ft USB 3.0 A Male to A Male leads
This pack contains two black cables, each three feet long, with USB Type‑A male plugs at both ends. They are built to the USB 3.0 specification and are rated for 5 Gbps throughput. The connectors are gold‑plated and the conductors are bare copper. Each cable is backward compatible with USB 2.0 and USB 1.1 hosts and devices.
Suits direct device‑to‑device links.
The male‑to‑male wiring is intended for connecting a USB 3.0 peripheral such as an external drive, dock or camera directly to a host port, or for linking two peripherals that both present a female Type‑A port. It will not work for connecting two computers or two host controllers because the USB architecture requires a host at one end of the link.
5 Gbps signalling rate
The cable is specified for the USB 3.0 SuperSpeed rate of 5 Gbps, which is ten times the 480 Mbps ceiling of USB 2.0. If either connected port only supports USB 2.0 or USB 1.1 the link will fall back to the slower standard, so the 5 Gbps figure is the decisive specification for buyers who need the higher throughput.
Highlights
- USB 3.0 delivers 5 Gbps transfer speed
- Two cables included for multiple connections
- A Male to A Male connects compatible devices
- Three-foot length suits desktop setups
- Backward compatible with USB 2.0 and 1.1
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | USB3-3MM-BK-2P |
| Type | USB 3.0 |
| Connector Type | USB A to USB A |
| Color | Black |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Features | About USB3.0 Type A Male to Type A Male - The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the |
| Shipping weight | 0.14 kg |
| Package size | 152 × 76 × 25 mm |
Questions about this item
Does the 3 ft USB 3.0 A Male to A Male cable draw noticeable power or run warm during all-day file transfers?
The cable carries USB 3.0 bus power at up to 5 Gbps and is passive, so it adds negligible heat or power draw during continuous use.
What host ports and devices must I already have for this A Male to A Male cable to function?
You need a USB Type-A port on each end — typically a PC or hub on one side and a peripheral with a Type-A receptacle on the other — because both connectors are male.
Will the 5 Gbps SuperSpeed link still negotiate when I plug it into older USB 2.0 or USB 1.1 ports?
Yes, the cable is fully backward compatible with USB 2.0 at 480 Mbps and USB 1.1, automatically negotiating the highest speed both ends support.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


