We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs SLCAT6-28-20GY network ethernet cable 20 ft 28 AWG Cat 6 550 MHz gray

SKU CH-480W-BVHEQ MPN SLCAT6-28-20GY

A 20 ft Cat 6 patch cable with 28 AWG stranded bare copper conductors, gold-plated RJ45 connectors and a snagless ultra-slim boot for high-density installations

  • TypeNetwork Ethernet Cable
  • Cat6
  • Connector A1 x RJ45
  • Connector B1 x RJ45
  • Length20 ft.
  • ColorGray
  • Slim 28 AWG profile eases routing in tight spaces
  • Snagless boot protects connector tabs during frequent moves
  • 20 ft length reaches across rooms without excess slack
  • 550 MHz Cat 6 rating supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality

Ultra-slim Cat 6 cable for dense installs

This 28 AWG Cat 6 patch cable runs 20 ft and carries a 550 MHz rating. Its stranded bare-copper conductors and gold-plated RJ45 plugs support 10-Gigabit Ethernet while remaining backward compatible with Fast and Gigabit Ethernet. The snagless, narrow-boot design suits high-density racks and tight cable-management channels.

Verify connector spacing and bend radius

Confirm that both endpoints use standard RJ45 jacks with enough clearance for the slim boot. Ensure the 28 AWG stranded wire can be routed without exceeding its minimum bend radius in your trunking or under-floor raceways. Check that the 20 ft length reaches between your switch, router, NAS, VoIP phone or PoE device without tension.

Stable throughput on long runs

The pure bare-copper construction resists signal loss over the full 20 ft span, sustaining 550 MHz bandwidth under continuous load rather than only in short bursts. Gold-plated contacts reduce corrosion risk for reliable PoE and data delivery in always-on environments such as data centres or telecom rooms.

Highlights

  • Slim 28 AWG profile eases routing in tight spaces
  • Snagless boot protects connector tabs during frequent moves
  • 20 ft length reaches across rooms without excess slack
  • 550 MHz Cat 6 rating supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality

Specifications

BrandNippon Labs
ModelSLCAT6-28-20GY
TypeNetwork Ethernet Cable
Cat6
Connector A1 x RJ45
Connector B1 x RJ45
Length20 ft.
ColorGray
Wire Gauge28 AWG
Features28 AWG
550Mhz
UTP
Snagless Ultra Slim Cat6
Shipping weight0.12 kg
Package size177 × 175 × 30 mm

Questions about this item

What comes with the 20 ft Cat 6 cable and do I need anything extra?

The cable has RJ45 connectors on both ends and is ready to plug into routers, switches, NAS devices or PoE equipment. No separate parts are required.

Should I pick the 28 AWG 550 MHz version or a different gauge?

The 28 AWG stranded construction makes this ultra-slim cable ideal for tight spaces and high-density racks while still delivering Cat 6 performance.

What does the 550 MHz rating mean for my 10‑Gigabit Ethernet link?

The 550 MHz bandwidth supports 10‑Gigabit Ethernet speeds and remains backward compatible with Fast Ethernet and Gigabit Ethernet networks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.