We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UV red SATA III cable with 90 and 180 degree connectors

Nippon Labs

Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree

SKU CH-GS55-SHECW MPN SATA3L1.5FT-90/180RD

A 1.5 ft SATA III cable with a 90-degree and 180-degree locking connector pair, supporting 6 Gb/s and backward compatible with 3 Gb/s and 1.5 Gb/s

  • TypeSATA III
  • ColorUV Red
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Connector Detail90 degree to 180 degree
  • 90-to-180-degree connectors simplify routing in tight cases
  • Locking latch secures the link against accidental disconnects
  • Supports SATA 6 Gb/s with backward compatibility to 3 Gb/s and 1.5 Gb/s
  • Flexible rubber sleeving bends and twists for clean cable management
  • RoHS compliant construction meets environmental standards

Nippon Labs 1.5 ft SATA III cable

This 1.5 ft SATA III cable from Nippon Labs carries data at up to 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices. It suits builders who need a short internal link between a motherboard port and a single drive.

90 to 180 degree locking connectors

One end angles 90 degrees and the other sits at 180 degrees, letting the cable hug tight corners inside compact cases. A locking latch on each connector prevents accidental disconnection during assembly or transport.

Sustained 6 Gb/s throughput under load

The UV red rubber sleeving resists kinking when the cable is routed around other components, keeping signal integrity stable during long file transfers. RoHS compliant materials meet restricted-substance requirements.

Highlights

  • 90-to-180-degree connectors simplify routing in tight cases
  • Locking latch secures the link against accidental disconnects
  • Supports SATA 6 Gb/s with backward compatibility to 3 Gb/s and 1.5 Gb/s
  • Flexible rubber sleeving bends and twists for clean cable management
  • RoHS compliant construction meets environmental standards

Specifications

BrandNippon Labs
ModelSATA3L1.5FT-90/180RD
TypeSATA III
ColorUV Red
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
Connector Detail90 degree to 180 degree
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.02 kg
Package size94 × 93 × 23 mm

Questions about this item

How can I confirm the SATA III cable is running at 6 Gb/s after connecting it?

The host controller or operating system will report the negotiated link speed as 6 Gb/s when the drive is active.

What comes with the cable and do I need any extra brackets or adapters?

The package includes the 1.5 ft SATA III cable with locking latches; no additional brackets or adapters are required.

Which connector angle suits a bottom-mounted SATA port with limited clearance?

The 90-degree end plugs into the drive while the 180-degree end fits flat against the motherboard port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.