We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short UV red SATA cable with 90 degree and 180 degree connectors

Nippon Labs

Nippon Labs SATA3L0.5FT-90/180RD 6 in. SATA cable 90 degree to 180 degree

SKU CH-HVVR-J5G7S MPN SATA3L0.5FT-90/180RD

A six-inch SATA cable with a 90-degree connector on one end and a straight connector on the other, supporting 6 Gb/s speeds and backward compatibility

  • TypeSATA III
  • ColorUV Red
  • Length0.5 ft.
  • Cable Length6 in.
  • Connector Number2
  • Connector Detail90 degree to 180 degree
  • SATA 6 Gb/s speed for fast data transfer
  • 90 to 180 degree connectors fit tight spaces
  • 6 in. length reduces cable clutter
  • Locking latch secures connection against vibration
  • RoHS compliant materials meet environmental standards

Compact SATA III cable for tight builds

This 6 in. SATA III cable links a drive to a motherboard or controller in cramped chassis where longer cables would obstruct airflow. The right-angle and straight connectors let builders route the run cleanly along a board edge or behind a drive cage. It suits anyone assembling a small-form-factor system or adding storage to an existing compact rig.

Sustained 6 Gb/s throughput with legacy support

The cable is rated for SATA 6 Gb/s technology and remains backward compatible with 3 Gb/s and 1.5 Gb/s devices, so mechanical drives and SSDs alike maintain their rated transfer rates during extended read or write sessions. Locking latches on both ends prevent accidental disconnection when vibration or cable movement occurs under continuous load.

UV-red rubber sleeving and mixed-angle connectors

Durable flexible rubber sleeving resists kinking and can be bent or twisted repeatedly during installation and later maintenance. The 90 degree to 180 degree connector orientation solves clearance problems against side panels or bulky GPU backplates. RoHS compliant materials meet restricted-substance requirements for system integrators.

Highlights

  • SATA 6 Gb/s speed for fast data transfer
  • 90 to 180 degree connectors fit tight spaces
  • 6 in. length reduces cable clutter
  • Locking latch secures connection against vibration
  • RoHS compliant materials meet environmental standards

Specifications

BrandNippon Labs
ModelSATA3L0.5FT-90/180RD
TypeSATA III
ColorUV Red
Length0.5 ft.
Cable Length6 in.
Connector Number2
Connector Detail90 degree to 180 degree
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.01 kg
Package size164 × 84 × 18 mm

Questions about this item

Does the 90 degree to 180 degree SATA cable generate noticeable heat during continuous all-day operation?

No, a passive SATA III cable carries only signal and low-voltage power; it produces no measurable heat even when run continuously.

What must I already own to use this 6 in. UV Red SATA III cable with locking latch?

You need a motherboard or controller with a standard SATA port and a drive or backplane that also presents a standard SATA connector.

Will this 90 degree to 180 degree SATA III cable work with my older 3 Gb/s and 1.5 Gb/s drives?

Yes, the cable is backward compatible with 3 Gb/s and 1.5 Gb/s SATA devices, so legacy drives connect without issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.