Nippon Labs
Nippon Labs SATA3L0.5FT-90/180BU sata cable 6 in 90 to 180 degree
A 6-inch SATA III cable with a 90-to-180-degree locking connector for tight internal routing
- TypeSATA III
- ColorBlue
- Length0.5 ft.
- Cable Length6 in.
- Connector Number2
- Connector Detail90 degree to 180 degree
- 6 Gb/s peak bandwidth for fast data transfers
- Backward compatible with 3 Gb/s and 1.5 Gb/s devices
- 90-degree to 180-degree angled connectors fit tight spaces
- Locking latch secures connection against vibration
- Flexible rubber sleeving bends and twists without damage
Cable Purpose
This 6-inch SATA III cable connects a motherboard or controller to a single drive using a 90-degree plug on one end and a straight 180-degree plug on the other. The mixed-angle layout lets builders route the cable cleanly in tight drive cages or behind motherboard trays where a straight connector would foul adjacent components. It is suited for system integrators and hobbyists who need a short, angled link without excess slack.
Build and Connectors
Each end carries a locking latch that resists accidental unplugging during transport or vibration. The blue jacket uses durable flexible rubber sleeving that tolerates repeated bending and twisting during installation. Connectors are rated for SATA 6 Gb/s and remain backward compatible with 3 Gb/s and 1.5 Gb/s devices. RoHS compliance confirms restricted-substance adherence.
Upgrade Context
The cable replaces a standard straight-to-straight lead when clearance between the drive and the port is limited or when cable management demands a sharp turn at one end only. The jump is worth it when the 6-inch length matches the exact port-to-drive distance and the 90-degree orientation solves a routing conflict that a straight plug cannot. It does not suit builds that require longer runs or dual-drive connections from a single header.
Highlights
- 6 Gb/s peak bandwidth for fast data transfers
- Backward compatible with 3 Gb/s and 1.5 Gb/s devices
- 90-degree to 180-degree angled connectors fit tight spaces
- Locking latch secures connection against vibration
- Flexible rubber sleeving bends and twists without damage
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | SATA3L0.5FT-90/180BU |
| Type | SATA III |
| Color | Blue |
| Length | 0.5 ft. |
| Cable Length | 6 in. |
| Connector Number | 2 |
| Connector Detail | 90 degree to 180 degree |
| Features | Supported SATA 6 Gb/s technology Backward compatible with 3 Gb/s and 1.5 Gb/s Durable flexible rubber sleeving can be bent and twisted. The ability to connect and disconnect devices without prior notification. RoHS compliant. |
| Shipping weight | 0.01 kg |
| Package size | 178 × 64 × 22 mm |
Questions about this item
What speed does the SATA III interface on this cable support?
The cable supports SATA 6 Gb/s technology and is backward compatible with 3 Gb/s and 1.5 Gb/s devices.
How much clearance does the 90-degree to 180-degree connector layout require?
The cable is 6 in. long with one 90-degree and one 180-degree connector, designed for tight spaces where straight plugs will not fit.
How do you release the locking latch when removing the cable?
Press the latch release tab on the connector before pulling; forcing it out without releasing the latch can damage the port.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115317BTC
In stock
