Nippon Labs
Nippon Labs POW-08315 15" ATX 4pin Male to Molex LP4 Male internal power cable
15-inch cable adapts an ATX 4-pin male connector to a Molex LP4 male connector for internal power routing
- ColorMulti-Color
- Length15"
- Cable Length1.25 ft.
- Connector A1x ATX 4pin male
- Connector B1x Molex LP4 male
- Connector Number2
- Connects ATX 4-pin power to Molex LP4 devices
- 15-inch length gives flexible routing inside the case
- Multi-colour wires simplify identification during installation
- Two connectors link PSU and peripheral directly
- New condition ensures reliable factory-quality performance
Purpose and audience
This 15-inch internal power cable converts an ATX 4-pin male connector to a Molex LP4 male connector, letting builders link a standard motherboard power header to legacy drives or accessories. It suits system integrators and hobbyists who need a short, direct adapter rather than a full harness replacement.
Capacity and headroom
The 1.25 ft length provides enough slack to route the cable behind a motherboard tray or between drive bays without excess coil. It handles the 12 V rail carried by the ATX 4-pin source, but the single Molex output limits the assembly to one peripheral, so multi-device chains require additional splitters.
Build integration
The two-connector design plugs straight into an existing ATX 4-pin header and a Molex-equipped device, needing no tools or extra wiring. Its compact footprint frees up space in tight chassis corners while the multi-colour wires aid quick identification during assembly or troubleshooting.
Highlights
- Connects ATX 4-pin power to Molex LP4 devices
- 15-inch length gives flexible routing inside the case
- Multi-colour wires simplify identification during installation
- Two connectors link PSU and peripheral directly
- New condition ensures reliable factory-quality performance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | POW-08315 |
| Color | Multi-Color |
| Length | 15" |
| Cable Length | 1.25 ft. |
| Connector A | 1x ATX 4pin male |
| Connector B | 1x Molex LP4 male |
| Connector Number | 2 |
| Terminal Gender | Female to Male |
| Features | This 20-pin ATX Power Extension Cable offers a male 20-pin ATX connector as well as a female 20-pin connector Allowing you to extend the length of an ATX power supply connection by 9in Providing enough cable slack to position the motherboard as needed in relation to the power supply without having to strain the ATX power connection. |
| Shipping weight | 0.02 kg |
| Package size | 135 × 127 × 23 mm |
Questions about this item
Will this 15" ATX 4-pin male to Molex LP4 male cable reach my older motherboard connector without tension?
The cable is 15 inches long, giving you 1.25 feet of slack between the power supply and the motherboard.
How can I verify the cable is delivering power correctly after I connect it?
The system should boot normally and the motherboard power LED, if present, will light up once the 4-pin ATX connector is seated.
Does the package include any extra adapters or only the single cable shown?
The box contains one 15-inch cable with a 4-pin ATX male connector on one end and a Molex LP4 male connector on the other.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115651BTC
In stock
