We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs POW-05206 6.1 in 5.25 Male to 3.5 Female Internal Power Cable

SKU CH-ZC1F-6815T MPN POW-05206

Short 6.1 in cable converts a 5.25 male power connector to a 3.5 female for internal drives

  • ColorMulti-Color
  • Length6"
  • Cable Length6.1 in.
  • Connector Number2
  • Terminal GenderFemale to Male
  • FeaturesOne 3.5 females to attach drives One 5.25 male socket to con
  • Connects 3.5 drives to a 5.25 power socket
  • 1 in cable keeps internal wiring tidy
  • Two connectors complete the power path in seconds
  • Multi-colour wires simplify identification during installation
  • Supports floppy, hard drive, CD-ROM and tape backup units

5.25-to-3.5 power adapter

This 6.1 in cable converts a 5.25 male socket from the power supply into a 3.5 female connector for internal drives. It supports floppy drives, hard disks, CD-ROMs and tape backup units. The short length keeps wiring tidy inside compact cases. Builders restoring vintage systems or adding legacy storage will find it useful.

Tool-free installation and common issues

Push the 5.25 male end onto the PSU lead until it clicks, then attach the 3.5 female end to the drive. The rigid connectors seat firmly without screws. Misalignment can bend the pins on the 3.5 side, so line up the chamfered corners before pressing. A loose fit on aged PSU headers may cause intermittent power.

Check drive power needs and cable reach

Verify the target drive uses a standard 3.5 power input and not a proprietary connector. Confirm the 6.1 in span reaches from the PSU cable to the drive bay in your chassis. Ensure the PSU still provides a free 5.25 output; some modern units omit this style entirely.

Highlights

  • Connects 3.5 drives to a 5.25 power socket
  • 1 in cable keeps internal wiring tidy
  • Two connectors complete the power path in seconds
  • Multi-colour wires simplify identification during installation
  • Supports floppy, hard drive, CD-ROM and tape backup units

Specifications

BrandNippon Labs
ModelPOW-05206
ColorMulti-Color
Length6"
Cable Length6.1 in.
Connector Number2
Terminal GenderFemale to Male
FeaturesOne 3.5 females to attach drives
One 5.25 male socket to connect to the PC power supply
Used to supply power to internal 5.25 floppy drives, hard disk drives, CD-ROMS, and tape backup systems.
Shipping weight0.01 kg
Package size184 × 50 × 23 mm

Questions about this item

How can I verify the POW-05206 is delivering power to my 3.5 inch drive after installation?

The drive should spin up and be detected by the BIOS once the 5.25 male plug is seated in the power supply and the 3.5 female connector is attached to the drive.

What connectors are included on the POW-05206 and do I need any extra cables?

The cable has one 5.25 male socket for the power supply and one 3.5 female connector for the drive; no additional cables are required for that connection.

Which version of this adaptor should I choose for a 5.25 inch floppy or tape backup unit?

The POW-05206 is built for that purpose — its 5.25 male plug draws power from the supply while the 3.5 female end feeds the drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.