Nippon Labs
Nippon Labs DP-VGA-6 6 ft DisplayPort to VGA Male Male 28 AWG Cable
A 6 ft male-to-male cable connects a DisplayPort source to a VGA display at up to 1920x1200 or 1080p using 28 AWG conductors with gold-plated ends and foil and braid shielding
- ColorBlack
- Length6 ft.
- Cable Length6 ft.
- Connector Number2
- Connector DetailDisplayPort to VGA
- Terminal GenderMale to Male
- Connect VGA displays to DisplayPort sources via male-to-male cable
- 6 ft length suits typical desk-to-monitor runs without excess slack
- 28 AWG conductors with gold-plated ends resist corrosion and maintain signal integrity
- Foil and braid shielding blocks interference for stable video transmission
- Supports up to 1920x1200 PC and 1080p HDTV resolutions for clear picture
Connect VGA Displays to DisplayPort Sources
The Nippon Labs DP-VGA-6 is a 6 ft adapter cable with a male DisplayPort connector on one end and a male VGA connector on the other. It lets you link a VGA monitor or projector to a desktop or laptop that only offers a DisplayPort output. Gold-plated contacts, bare copper conductors and foil-plus-braid shielding are used to maintain signal integrity.
Suits Legacy Screen Connections Only
This cable serves users who need to attach an older VGA display to a modern DisplayPort source for extended or mirrored desktop modes. It is not for buyers who require a native DisplayPort-to-DisplayPort link, an active signal converter for higher resolutions, or an audio path since VGA carries video only.
Check Port Types and Resolution Needs
Verify that your source device has a full-size DisplayPort output and that your display accepts a male VGA plug. The adapter supports PC resolutions up to 1920x1200 and HDTV resolutions up to 1080p. Confirm these limits meet your application before ordering.
Highlights
- Connect VGA displays to DisplayPort sources via male-to-male cable
- 6 ft length suits typical desk-to-monitor runs without excess slack
- 28 AWG conductors with gold-plated ends resist corrosion and maintain signal integrity
- Foil and braid shielding blocks interference for stable video transmission
- Supports up to 1920x1200 PC and 1080p HDTV resolutions for clear picture
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | DP-VGA-6 |
| Color | Black |
| Length | 6 ft. |
| Cable Length | 6 ft. |
| Connector Number | 2 |
| Connector Detail | DisplayPort to VGA |
| Terminal Gender | Male to Male |
| Wire Gauge | 28 AWG |
| Features | The DisplayPort to VGA adapter enable you to connect any VGA interface embedded device (Monitor, Projector...) with a DisplayPort interface (Desktop, Laptop) and no need to purchase any DisplayPort embedded terminal device. Compliance with DisplayPort Specification V1.1a at 1.62/2.7Gbps data rate (Low bit rate/High bit rate) Support up to WUXGA (1920X1200) and 1080p @60Hz (Full HD) Support Digital Video Output in 18/24/30 (deep color) bits format. (6-bit, 8-bit, 10-bit per color RGB color format) |
| Shipping weight | 0.13 kg |
| Package size | 180 × 151 × 51 mm |
Questions about this item
What type of video output must my computer have for this cable to work?
Your computer needs a DisplayPort output to connect the DisplayPort male end of this cable.
Can I use this cable with a monitor that only has a VGA input?
Yes, the VGA male connector on the other end plugs directly into a VGA monitor or projector.
What maximum resolution should I see if the cable is working correctly?
The cable supports PC resolutions up to 1920x1200 and HDTV resolutions up to 1080p when connected properly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
