Nippon Labs
Nippon Labs DP-VGA-3 displayport cable 3 ft 28 AWG male to male
Connects a DisplayPort source to a VGA monitor or projector at up to 1920x1200 and 1080p 60 Hz with a 3 ft 28 AWG cable
- ColorBlack
- Length3 ft.
- Cable Length3 ft.
- Connector Number2
- Connector DetailDisplayPort to VGA
- Terminal GenderMale to Male
- Connect VGA monitors to DisplayPort sources without extra adapters
- 3 ft cable keeps desk setups tidy and flexible
- 28 AWG conductors support 1080p @60 Hz and WUXGA 1920×1200
- Male-to-male DisplayPort and VGA plugs for direct device-to-device link
- Compliant with DisplayPort 1.1a at 1.62/2.7 Gbps data rates
Active DisplayPort-to-VGA adapter cable
This Nippon Labs DP-VGA-3 cable integrates an active converter so a DisplayPort source can drive a VGA monitor or projector without a separate dongle. The three-foot black cable carries male connectors on both ends and uses 28 AWG conductors. It targets users adding a legacy display to a modern desktop or laptop that lacks native VGA output.
Replaces separate adapter plus cable
Instead of chaining a passive DisplayPort-to-VGA dongle to a standard cable, this single assembly handles the digital-to-analogue conversion internally. The jump is worth it when desk space is tight, when cable routing must stay simple, or when a shorter three-foot reach matches the distance between GPU and monitor.
Check DisplayPort output and VGA input
Verify the source device provides a standard DisplayPort signal; the adapter will not work from HDMI, DVI or USB-C ports without their own active conversion. Confirm the target display accepts VGA at up to 1920 by 1200 at 60 Hz, the maximum resolution the cable supports. No external power is required, but the source must supply enough current for the built-in converter.
Highlights
- Connect VGA monitors to DisplayPort sources without extra adapters
- 3 ft cable keeps desk setups tidy and flexible
- 28 AWG conductors support 1080p @60 Hz and WUXGA 1920×1200
- Male-to-male DisplayPort and VGA plugs for direct device-to-device link
- Compliant with DisplayPort 1.1a at 1.62/2.7 Gbps data rates
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | DP-VGA-3 |
| Color | Black |
| Length | 3 ft. |
| Cable Length | 3 ft. |
| Connector Number | 2 |
| Connector Detail | DisplayPort to VGA |
| Terminal Gender | Male to Male |
| Wire Gauge | 28 AWG |
| Features | The DisplayPort to VGA adapter enable you to connect any VGA interface embedded device (Monitor, Projector...) with a DisplayPort interface (Desktop, Laptop) and no need to purchase any DisplayPort embedded terminal device. Compliance with DisplayPort Specification V1.1a at 1.62/2.7Gbps data rate (Low bit rate/High bit rate) Support up to WUXGA (1920X1200) and 1080p @60Hz (Full HD) Support Digital Video Output in 18/24/30 (deep color) bits format. (6-bit, 8-bit, 10-bit per color RGB color format) |
| Shipping weight | 0.09 kg |
| Package size | 208 × 154 × 36 mm |
Questions about this item
What connector types are on each end of the 3 ft cable?
One end has a male DisplayPort plug and the other end has a male VGA plug, both moulded onto the 28 AWG cable.
Which end plugs into the computer and which end plugs into the display?
Insert the DisplayPort male connector into the source device such as a desktop or laptop, then connect the VGA male connector to the monitor or projector.
Does the active adapter chip inside the cable require a separate power connection?
No, the adapter draws the power it needs directly from the DisplayPort source so no external power cable is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115713BTC
In stock
