Nippon Labs
Nippon Labs AD-DP-HDMI-PS 6" DisplayPort Male to HDMI Female Passive Adapter
Connects a DisplayPort source to an HDMI display at 1080p 60 Hz with passive DP++ operation
- TypePassive Adapter, Support DP++ source only
- ColorBlack
- Cable Length6"
- SpecificationsDisplayPort Compliant: DisplayPort V1.1a HDMI Compliant: HDM
- Connector ADisplayPort Male
- Connector BHDMI Female
- Connects DisplayPort source to HDMI display with 6" cable
- Supports 1080p 60 Hz video via DisplayPort 1.1a and HDMI 1.3a
- Carries 2-channel LPCM and 5.1-channel audio without extra software
- Passive design draws power from DisplayPort port for simple plug-and-play use
- DPCP and HDCP content protection ensures compatibility with protected media
DisplayPort Male to HDMI Female Passive Adapter
The Nippon Labs AD-DP-HDMI-PS converts a DisplayPort output to an HDMI input using a short 6 inch cable. It requires a DP++ dual-mode source and supports video up to 1080p at 60 Hz. Audio passes through as 2 channel LPCM or 5.1 channel compressed formats. No external power or driver installation is needed.
Builders with DP++ sources needing HDMI connectivity
This adapter suits users connecting a DisplayPort equipped graphics card or laptop to an HDMI monitor, projector or television. It will not work with DisplayPort sources that lack DP++ dual-mode output. Buyers needing higher resolutions, refresh rates above 60 Hz, or active signal conversion should look at a different solution.
DP++ dual-mode requirement
The single specification that decides compatibility is the DP++ dual-mode support on the source device. Without this feature the DisplayPort male connector cannot output the TMDS signalling required by the HDMI female port. Check the source documentation for DP++ or dual-mode confirmation before purchasing.
Highlights
- Connects DisplayPort source to HDMI display with 6" cable
- Supports 1080p 60 Hz video via DisplayPort 1.1a and HDMI 1.3a
- Carries 2-channel LPCM and 5.1-channel audio without extra software
- Passive design draws power from DisplayPort port for simple plug-and-play use
- DPCP and HDCP content protection ensures compatibility with protected media
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | AD-DP-HDMI-PS |
| Type | Passive Adapter, Support DP++ source only |
| Color | Black |
| Cable Length | 6" |
| Specifications | DisplayPort Compliant: DisplayPort V1.1a HDMI Compliant: HDMI 1.3a, backward DVI 1.0 Content Protection: DPCP & HDCP Input: DisplayPort Male Output: HDMI Female TMDS Clock Rate: 225MHz max. Bandwidth: 6.75 Gbps Video Resolution: 1080p @60 Hz 3D Video Support: Yes Audio Support: 2CH LPCM & 5.1CH Audo (DTS, AC-3 etc.) Driver: Plug and Play, No Software to Install Power by: DisplayPort source |
| Connector A | DisplayPort Male |
| Connector B | HDMI Female |
| Shipping weight | 0.04 kg |
| Package size | 204 × 114 × 14 mm |
Questions about this item
Should I choose the 6-inch version or a longer cable for my setup?
The adapter is a fixed 6-inch length with a DisplayPort male plug on one end and an HDMI female port on the other, so choose it when you need a short, direct connection without extra cable slack.
What does the 1080p @60 Hz rating mean once I plug this into my PC?
The passive adapter supports up to 1080p resolution at 60 Hz, driven by a DP++ source, with a maximum TMDS clock of 225 MHz and 6.75 Gbps bandwidth for standard HD content.
Which DisplayPort and HDMI standards does this adapter use, and what do they limit in practice?
It complies with DisplayPort 1.1a and HDMI 1.3a, capping video at 1080p 60 Hz and audio to 2-channel LPCM or 5.1-channel compressed formats like DTS and AC-3.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115471BTC
In stock
