Nippon Labs
Nippon Labs 60CAT8-50-24RD-10P 50 ft Cat 8 Red 24 AWG S/FTP network ethernet cable
A 50 ft shielded Cat 8 patch cord rated for 2 GHz and 40 Gbps, built with 24 AWG conductors and gold-plated RJ45 plugs
- TypeNetwork Ethernet Cables
- Cat8
- Connector ARJ45
- Connector BRJ45
- Length50 ft.
- ColorRed
- Supports 40Gbps speeds with 2000 MHz bandwidth
- 50 ft length fits rack-to-switch runs
- Double S/FTP shielding blocks signal interference
- 24 AWG pure copper conductors ensure reliability
- Backward compatible with Cat5 through Cat7 gear
High-speed Cat 8 patch cable for data-centre links
This 50 ft red Cat 8 cable is built for 25GBASE-T and 40GBASE-T networks running at 2 GHz (2000 MHz). The S/FTP shielding protects signal integrity in dense rack environments. It suits servers, switches and patch panels in small-to-medium enterprise LANs. Backward compatibility covers all earlier RJ45 categories.
Passive cable runs cool
As a fully passive copper assembly the cord generates no heat and produces zero acoustic noise. It draws no power from connected ports, leaving the full PoE budget for attached devices. The 24 AWG pure copper conductors keep insertion loss low across the full 50 ft run.
Shielded RJ45 ends fit standard ports
Gold-plated RJ45 plugs on both ends mate with any Cat 5e through Cat 8 jack without adapters. The flexible PVC jacket and combined foil-plus-braid shield allow tight bends inside crowded cabinets. The 50 ft length spans adjacent racks while the red jacket simplifies cable identification.
Highlights
- Supports 40Gbps speeds with 2000 MHz bandwidth
- 50 ft length fits rack-to-switch runs
- Double S/FTP shielding blocks signal interference
- 24 AWG pure copper conductors ensure reliability
- Backward compatible with Cat5 through Cat7 gear
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-50-24RD-10P |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 50 ft. |
| Color | Red |
| Shielded | Yes |
| Wire Gauge | 24 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs, |
| Shipping weight | 9.98 kg |
| Package size | 508 × 254 × 203 mm |
Questions about this item
How do I install the 24 AWG S/FTP Cat 8 cable and what step is often missed?
Route the 50 ft red cable, seat both RJ45 plugs until they click, then verify the link negotiates at 25 or 40 Gbps — skipping the speed check is the common miss.
What maintenance or replacement will the shielded 2 GHz cable need later?
Inspect the gold-plated RJ45 contacts and PVC jacket periodically; replace the cord if the foil or mesh shield is kinked or the connectors no longer latch securely.
What limit appears first on this 2000 MHz Cat 8 run under sustained 40 Gbps load?
The 50 ft length stays within the Cat 8 channel limit, so the first bottleneck is usually the connected port’s 25GBASE-T or 40GBASE-T capability, not the cable itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115651BTC
In stock
