Nippon Labs
Nippon Labs 50S3H-Y-1-BK 1 ft 3.5mm TRS Stereo Male to 2 Female Y-Cable Black
Splits one 3.5mm stereo output into two female ports with gold-plated contacts and a nickel-plated metal shell
- TypeStereo Cables
- ColorBlack
- Length1 Foot
- Connector Number3
- Connector Detail3.5mm (1/8 inch) TRS Stereo Male to 2 Female Cable
- Terminal GenderMale to Female
- Splits one 3.5mm stereo output into two inputs
- Gold-plated contacts resist corrosion for clear signal transfer
- Nickel-plated metal shells add connector durability
- 1 ft length keeps desk setups tidy
- 00 mm PVC jacket protects internal conductors
1 ft 3.5 mm stereo Y-cable
This 1 ft 3.5 mm stereo Y-cable splits a single TRS male plug into two TRS female sockets. It suits desktop users who need to connect two headphones or powered speakers to one 3.5 mm output. The short length keeps cable clutter minimal on a tidy workstation.
Practical limits of the 3.5 mm TRS interface
The 3.5 mm TRS connector carries an unbalanced stereo signal and is limited by the source device's output impedance and voltage. Long runs or high-impedance loads can reduce volume or increase noise. The 4.00 mm PVC jacket provides basic protection but the cable is not rated for in-wall or outdoor use.
Capacity and headroom for typical audio splits
Gold-plated contacts and nickel-plated metal shells maintain low contact resistance for clean signal transfer. The cable comfortably drives two standard headphones or a pair of desktop speakers from a phone, laptop or audio interface. It does not amplify the signal, so very high-impedance headphones may not reach desired loudness.
Highlights
- Splits one 3.5mm stereo output into two inputs
- Gold-plated contacts resist corrosion for clear signal transfer
- Nickel-plated metal shells add connector durability
- 1 ft length keeps desk setups tidy
- 00 mm PVC jacket protects internal conductors
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 50S3H-Y-1-BK |
| Type | Stereo Cables |
| Color | Black |
| Length | 1 Foot |
| Connector Number | 3 |
| Connector Detail | 3.5mm (1/8 inch) TRS Stereo Male to 2 Female Cable |
| Terminal Gender | Male to Female |
| Specifications | 1ft 3.5mm (1/8 inch) TRS Stereo Male to 2 Female Cable, Metal Shell, Gold Plated, OD: 4.00mm - Black This professional grade 3.5mm stereo Y-cable provides high-quality data transfers for your audio components. The nylon sleeve cable enhances the durability and quality of the data stream providing only the most sharp and vivid sounds. This easy to install cable supplied by PI Manufacturing is sure to satisfy with its delivery of intense sounds and remarkable performance. |
| Features | 1 feet long 3.5mm stereo male to 2 x 3.5mm stereo female Nickel plated metal shell connectors Jacket: PVC OD: 4.00mm Gold plated |
| Shipping weight | 0.07 kg |
| Package size | 152 × 127 × 4 mm |
Questions about this item
Should I choose the 1 ft length or a longer cable for my desktop setup?
The 1 ft length keeps the split close to the source, reducing clutter and signal loss on short runs; pick a longer cable only if the two female ports must reach widely separated headphones or speakers.
What does the 3.5 mm TRS stereo male connector actually carry when I plug it into my laptop?
It carries a single stereo signal — left, right and ground — that the Y splitter then duplicates to both 3.5 mm female ports so two headphones hear the same audio.
Does the 3.5 mm interface limit audio quality compared with a larger jack?
The 3.5 mm TRS connector passes the full analogue stereo bandwidth your source provides; gold‑plated contacts and a 4.00 mm OD PVC jacket preserve signal integrity without adding digital conversion or compression.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



