We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 50DP14V-MM-10 displayport cable 10 ft 1.4 HBR3 32.4 Gbps 8K 60Hz

SKU CH-8XPM-6D5M5 MPN 50DP14V-MM-10

Carries 8K 60 Hz or 4K 165 Hz video over a 10 ft male-to-male DisplayPort 1.4 link with 32.4 Gbps HBR3 bandwidth

  • TypeDisplayPort Cable
  • ColorBlack
  • Length10 ft.
  • Cable Length10 ft.
  • Connector Number2
  • Connect From1 x DisplayPort 1.4

Cable Length 10 Feet

  • 8K 60 Hz video via 32.4 Gbps HBR3 bandwidth
  • 4K 165 Hz gaming support with DSC 1.2 compression
  • HDR 10-bit colour for deeper contrast and wider gamut
  • 32 audio channels plus 7.1 pass-through over DisplayPort 1.4
  • 10 ft 100 % copper cable with 24 K gold-plated connectors

DisplayPort 1.4 HBR3 cable 10 ft

This 10 ft DisplayPort 1.4 cable carries HBR3 bandwidth of 32.4 Gbps and supports DSC 1.2 compression. It connects a source and a display with male-to-male connectors and is backwards compatible with DisplayPort 1.2 devices.

Gamers and creators needing 8K 60 Hz or 4K 165 Hz

The cable suits users who want 8K at 60 Hz, 4K at up to 165 Hz, or 1440p at 165 Hz with HDR and up to 32 audio channels. Buyers who need longer runs than 10 ft or who require USB-C Alternate Mode directly on the cable should look at other solutions.

32.4 Gbps HBR3 bandwidth decides compatibility

The single specification that determines whether this cable fits a build is its 32.4 Gbps HBR3 rating combined with DSC 1.2 support. If the source and sink both operate at that link rate the cable will deliver the stated resolutions and refresh rates.

Highlights

  • 8K 60 Hz video via 32.4 Gbps HBR3 bandwidth
  • 4K 165 Hz gaming support with DSC 1.2 compression
  • HDR 10-bit colour for deeper contrast and wider gamut
  • 32 audio channels plus 7.1 pass-through over DisplayPort 1.4
  • 10 ft 100 % copper cable with 24 K gold-plated connectors

Specifications

BrandNippon Labs
Model50DP14V-MM-10
TypeDisplayPort Cable
ColorBlack
Length10 ft.
Cable Length10 ft.
Connector Number2
Connect From1 x DisplayPort 1.4
Connect To1 x DisplayPort 1.4
Terminal GenderMale to Male
Shipping weight0.20 kg
Package size188 × 142 × 51 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 10 ft cable fit through standard conduit or behind tight desk grommets?

The cable is 10 ft long with two male DisplayPort 1.4 connectors; measure your conduit or grommet diameter against the cable's outer jacket before routing.

What is the correct way to seat the 24K gold-plated connectors so the 32.4 Gbps link trains at HBR3?

Align the connector's flat side with the port, push straight in until the latch clicks, and avoid angling the plug which can prevent full HBR3 negotiation.

When should I consider replacing this cable if 8K 60 Hz HDR or 4K 165 Hz gaming shows sparkles or drop-outs?

Replace the cable if reseating both ends and verifying source or sink firmware does not restore a stable 32.4 Gbps link, as copper conductors and gold contacts do not degrade under normal use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.