We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 30U-10U2-AMRJ45-06 USB 2.0 Type A to RJ45 6ft network ethernet cable

SKU CH-AM6E-R7JQR MPN 30U-10U2-AMRJ45-06

Connects a USB 2.0 Type A port to an RJ45 console port with a flat periwinkle blue jacket and FT232+ZT213 chip over six feet

  • TypeNetwork Ethernet Cables
  • Cat-
  • Connector AUSB 2.0 Type A Male
  • Connector BRJ45 8P8C Male
  • Length6 ft.
  • ColorPeriwinkle Blue
  • Flat periwinkle jacket simplifies routing in tight spaces
  • Gold-plated contacts resist corrosion for reliable signal transfer
  • Integrated FT232+ZT213 chipset enables USB-to-serial console access
  • 100 % tested for shorts, opens and breaks ensures dependable operation
  • Six-foot length connects nearby rack equipment without excess slack

Console cable for network gear

This six-foot cable connects a USB 2.0 Type A port to an RJ45 8P8C console port on routers, switches or firewalls. The flat periwinkle blue jacket makes it easy to identify in a crowded rack. Gold-plated contacts and a shielded design help maintain signal integrity during configuration sessions. It is built for administrators who need a direct serial link without a separate adapter.

Check your device ports first

Verify that the target equipment presents a standard RJ45 console interface rather than an Ethernet data port. The USB end requires a free Type A socket on your laptop or crash cart. No driver installation is mentioned in the specifications, so confirm operating-system support for the FT232+ZT213 chipset before relying on it for out-of-band management. The cable carries console signalling only, not network traffic.

Shielded flat cable with tested PCB

The flat jacket resists tangling and routes cleanly along cable-management arms. Shielding and the stated impedance figures — conductive impedance below 3 ohm, insulation impedance above 2M ohm — indicate attention to signal quality. Every unit is 100 percent tested for short circuit, open circuit and continuity, and the onboard PCB integrates the FT232+ZT213 chip for USB-to-serial conversion. RoHS-compliant materials are used throughout.

Highlights

  • Flat periwinkle jacket simplifies routing in tight spaces
  • Gold-plated contacts resist corrosion for reliable signal transfer
  • Integrated FT232+ZT213 chipset enables USB-to-serial console access
  • 100 % tested for shorts, opens and breaks ensures dependable operation
  • Six-foot length connects nearby rack equipment without excess slack

Specifications

BrandNippon Labs
Model30U-10U2-AMRJ45-06
TypeNetwork Ethernet Cables
Cat-
Connector AUSB 2.0 Type A Male
Connector BRJ45 8P8C Male
Length6 ft.
ColorPeriwinkle Blue
ShieldedYes
Features• Flat jacket in periwinkle blue color
• Conductive impedance less than 3 ohm
• Insulation impedance greater than 2M ohm
• Gold-plated contact
• PCB with FT232+ZT213 Chip
• Voltage at 300V
• 100% tested short circuit, open circuit, and break
• 100% functional tested
• All materials RoHS complied
Shipping weight0.45 kg
Package size152 × 127 × 51 mm

Questions about this item

Does the 6 ft cable ship with any adapters or drivers, or must I obtain them separately?

The cable includes the FT232+ZT213 chip on its internal PCB so the USB 2.0 Type A end is recognised as a virtual COM port; most current operating systems load the driver automatically, otherwise the vendor's driver package is a separate download.

The listing mentions a flat periwinkle blue jacket — are other colours or jacket styles available under the same model?

This model is offered only in periwinkle blue with a flat jacket; no alternative colours or round-jacket variants share the 30U-10U2-AMRJ45-06 part number.

What does the conductive impedance of less than 3 ohm mean when I connect a network switch to a laptop through this cable?

It indicates very low resistance on each conductor, so signal loss over the 6 ft run stays minimal and the USB-to-serial console link remains reliable at standard baud rates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.