We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power cord with locking L6-20P plug and C19 connector

Nippon Labs

Nippon Labs 30POW-10W1-L62019-10 computer power cord L6-20P to C19 12 AWG 20A 250V 10 ft

SKU CH-YV44-9GXD4 MPN 30POW-10W1-L62019-10

A 10 ft, 12 AWG power cord with a locking NEMA L6-20P plug and IEC-60320-C19 connector rated for 20A at 250V

  • TypePower
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • Connector DetailNEMA L6-20P to IEC-60320-C19
  • SpecificationsConnector A: NEMA L6-20P Locking Connector B: IEC-60320-C19
  • Secure locking NEMA L6-20P plug prevents accidental disconnects
  • 12 AWG SJT conductors support 20 A at 250 V for high-power gear
  • IEC-60320-C19 connector fits server and PDU inlets directly
  • Fully moulded strain relief protects the cable in dense rack runs
  • UL and cUL listed with RoHS and REACH compliant materials

Data-centre power cord

This 10 ft cable connects a C19-equipped network device to an L6-20R outlet in a rack or wiring closet. The NEMA L6-20P locking plug prevents accidental disconnection under vibration or cable pull. Heavy-duty 12 AWG conductors rated for 20 A at 250 V handle continuous high-current loads. UL and cUL listings confirm compliance with North American safety standards.

Locking connector and moulded strain relief

The L6-20P locking mechanism secures the plug in the receptacle without tools or clips. Fully moulded ends protect the SJT 12 AWG x 3C conductors from bending stress at the termination points. RoHS and REACH compliant materials remove restricted substances from the supply chain. No additional adapters or software are included in the package.

20 A 250 V rating

The 20 A 250 V rating is the single specification that determines whether this cord suits the connected equipment and upstream breaker. Devices drawing more than 20 A or operating on a different voltage require a different cable assembly. Builders needing a straight-blade plug or a lower amperage rating should select an alternative part.

Highlights

  • Secure locking NEMA L6-20P plug prevents accidental disconnects
  • 12 AWG SJT conductors support 20 A at 250 V for high-power gear
  • IEC-60320-C19 connector fits server and PDU inlets directly
  • Fully moulded strain relief protects the cable in dense rack runs
  • UL and cUL listed with RoHS and REACH compliant materials

Specifications

BrandNippon Labs
Model30POW-10W1-L62019-10
TypePower
ColorBlack
Length10 ft.
Connector Number2
Connector DetailNEMA L6-20P to IEC-60320-C19
SpecificationsConnector A: NEMA L6-20P Locking
Connector B: IEC-60320-C19
Conductor: SJT 12 AWG. x 3C
Amp/Voltage Rating: 20A/250V
Wire Gauge12 AWG
ConductorSJT 12 AWG. x 3C
FeaturesHigh voltage NEMA L6-20P to C19 power cord is designed for connecting network device to L6-20R wall outlet in a data center or network wiring closet.
The NEMA L6-20P locking connector allows it to be securely plugged into the power outlet for important equipment.
This heavy duty 12 AWG power cord is fully molded for durability.
UL and cUL listed.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.41 kg
Package size191 × 76 × 51 mm

Questions about this item

Does the 12 AWG SJT conductor or the NEMA L6-20P locking plug wear out first in a data-center rack?

Both the 12 AWG SJT cable and the locking NEMA L6-20P plug are fully moulded and UL/cUL listed for 20 A at 250 V; neither component has a rated service interval, so replacement is only needed if physical damage or insulation degradation is found during routine inspection.

What limits continuous 20 A load on this 10 ft cord — conductor heating or voltage drop?

The 12 AWG SJT conductors are rated for 20 A at 250 V; at 10 ft the resistive drop stays well within IEC 60320 C19 limits, so the cord runs to its full 20 A rating without derating for length.

Will the moulded SJT jacket stay cool and quiet when the cord carries 20 A all day?

The cord is passive — no fan or active parts — so it produces no noise; the 12 AWG SJT insulation is rated for the 20 A/250 V load, so temperature rise remains within UL/cUL limits during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.