Nippon Labs
Nippon Labs 30POW-10W1-C2021-06 computer power cord C20 to C21 12 AWG 20A 250V 6 ft
A 6 ft, 12 AWG cord with C20 to C21 connectors rated 20A at 250V for linking servers to PDUs or extending existing power leads
- TypePower Cord
- ColorBlack
- Length6 ft.
- Connector Number2
- Connector DetailIEC-60320-C20 to IEC-60320-C21
- SpecificationsConnector A: IEC-60320-C20 Connector B: IEC-60320-C21 Conduc
- Connects C21 devices to C20 PDU or UPS outlets in data centres
- Extends existing power cords by six feet for flexible rack placement
- Heavy-duty 12 AWG conductors rated 20A at 250V for reliable server power
- Fully moulded construction with UL and cUL listings for durable safety
- RoHS and REACH compliant materials meet environmental standards
IEC C20 to C21 jumper cord
This 6 ft power cord connects a C21 inlet on a server or network device to a C20 outlet on a PDU or UPS. It uses UL-listed SJT cable with 12 AWG conductors rated for 20 A at 250 V. The fully moulded black connectors are built for rack environments. UL and cUL listed, with RoHS and REACH compliant materials.
Suited for rack installs needing a short
It fits administrators extending a server power cable to a nearby PDU or UPS in a data centre. The 12 AWG gauge supports 20 A loads on standard C20/C21 gear. Buyers needing a longer run, a different connector pair, or a higher amperage rating should look at other options.
12 AWG conductor rating
The cable uses 12 AWG copper conductors, which determine its 20 A capacity at 250 V. Verify that both your device inlet and power source match the IEC 60320 C21 and C20 interfaces respectively.
Highlights
- Connects C21 devices to C20 PDU or UPS outlets in data centres
- Extends existing power cords by six feet for flexible rack placement
- Heavy-duty 12 AWG conductors rated 20A at 250V for reliable server power
- Fully moulded construction with UL and cUL listings for durable safety
- RoHS and REACH compliant materials meet environmental standards
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-C2021-06 |
| Type | Power Cord |
| Color | Black |
| Length | 6 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-60320-C20 to IEC-60320-C21 |
| Specifications | Connector A: IEC-60320-C20 Connector B: IEC-60320-C21 Conductor: UL SJT 12 AWG. x 3C Amp/Voltage Rating: 20A/250V |
| Wire Gauge | 12 AWG |
| Conductor | UL SJT 12 AWG. x 3C |
| Features | Connect C21 receptacle to computer, server or other devices and plug C20 connector into a PDU or UPS in a data center. Extend the length of an existing power cord for more flexibility. This heavy duty 12 AWG power cord is fully molded for durability. UL and cUL listed. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.27 kg |
| Package size | 178 × 89 × 25 mm |
Questions about this item
What clearance does the C20 plug need at the PDU or UPS inlet?
The fully moulded C20 connector adds roughly 50 mm beyond the inlet face, so allow at least that much depth in the rack or enclosure.
Which end should I connect first when linking a server to a PDU?
Seat the C21 end into the server power supply first, then plug the C20 end into the PDU or UPS to avoid strain on the IEC-60320-C21 receptacle.
When should I plan to replace this 12 AWG SJT cord in a 20 A data-centre circuit?
Inspect the jacket and moulded ends annually; replace the cord if you see cracking, discoloration or if the C20/C21 pins feel loose after repeated mating cycles.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
