We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power cord with NEMA 5-15P and IEC C19 connectors

Nippon Labs

Nippon Labs 30POW-10W1-51519-10 14 AWG NEMA 5-15P to C19 10 ft computer power cord

SKU CH-WDWQ-GJWPQ MPN 30POW-10W1-51519-10

Heavy-duty 14 AWG cable connects servers to a PDU with a NEMA 5-15P plug and C19 outlet, rated 15 A at 125 V

  • TypePower Cord
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • SpecificationsConnector A: NEMA 5-15P Connector B: IEC-60320-C19 Amp/Volta
  • Wire Gauge14 AWG
  • Heavy-duty 14 AWG wire supports 15 A server loads
  • NEMA 5-15P plug fits standard 125 V North American outlets
  • IEC-60320-C19 connector mates with high-power PDU inlets
  • Fully moulded SJT construction resists wear in rack environments
  • 10 ft length gives flexible routing inside data-centre cabinets

Server Power Connection

This Nippon Labs 14 AWG cord links a NEMA 5-15P plug to an IEC-60320-C19 inlet, rated at 15A/125V. The 10 ft SJT cable is fully moulded and carries UL and cUL listings plus RoHS and REACH compliance. It is built for server racks and data-centre PDUs that demand a higher-rated supply lead.

Data-Centre Installers

Suits technicians wiring servers or network gear to a C19-fed PDU in a rack environment. Not for equipment that only accepts a lower-rated inlet or for setups where a locking connector is required.

Connector Pair Decides Fit

The NEMA 5-15P to IEC-60320-C19 combination is the single specification that determines whether this cord matches your hardware. Verify the inlet on your device before ordering.

Highlights

  • Heavy-duty 14 AWG wire supports 15 A server loads
  • NEMA 5-15P plug fits standard 125 V North American outlets
  • IEC-60320-C19 connector mates with high-power PDU inlets
  • Fully moulded SJT construction resists wear in rack environments
  • 10 ft length gives flexible routing inside data-centre cabinets

Specifications

BrandNippon Labs
Model30POW-10W1-51519-10
TypePower Cord
ColorBlack
Length10 ft.
Connector Number2
SpecificationsConnector A: NEMA 5-15P
Connector B: IEC-60320-C19
Amp/Voltage Rating: 15A/125V
Wire Gauge14 AWG
ConductorSJT 14 AWG. x 3C
FeaturesThis heavy duty NEMA 5-15P to C19 power cord is designed for server applications that require a higher-rated cable.
Connect devices like computers and servers to a PDU in a data center.
This heavy duty 14 AWG power cord is fully molded for durability.
UL and cUL listed.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.36 kg
Package size191 × 76 × 51 mm

Questions about this item

Should I choose the 10 ft length or a shorter cable for my server rack?

The 10 ft length gives enough reach from a floor PDU to mid-rack equipment without excess slack; choose a shorter cord only if the outlet is closer to the device.

What does the 15A/125V rating mean when the cord is plugged into a standard US outlet?

It matches a typical NEMA 5-15R receptacle, so the cord can safely deliver the full 15 amps at 125 volts that the outlet provides.

How does the NEMA 5-15P to IEC-60320-C19 interface affect what I can connect?

The NEMA 5-15P plug goes into a standard US socket, while the C19 connector fits high-power server or PDU inlets that require the 15 A rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.