Nippon Labs
Nippon Labs 30POW-10W1-51519-08 computer power cord 14 AWG NEMA 5-15P to C19 8 ft
An 8 ft, 14 AWG cord rated 15 A at 125 V connects a NEMA 5-15P plug to a C19 inlet for server or PDU use
- TypePower Cord
- ColorBlack
- Length8 ft.
- Connector Number2
- SpecificationsConnector A: NEMA 5-15P Connector B: IEC-60320-C19 Amp/Volta
- Wire Gauge14 AWG
- Heavy-duty 14 AWG cable handles 15 A server loads
- NEMA 5-15P to IEC-60320-C19 connects equipment to PDUs
- 8 ft length fits standard rack-to-PDU distances
- Fully moulded strain relief resists damage in dense cabinets
- UL and cUL listed for data-centre compliance
Server power cord
This 8 ft cord connects a NEMA 5-15P plug to an IEC-60320-C19 inlet, rated at 15A and 125V. The 14 AWG SJT conductors suit server and data-centre equipment that needs a higher-rated cable than standard desktop leads. Fully moulded construction and UL/cUL listing support reliable installation in rack environments. RoHS and REACH compliant materials meet current environmental directives.
Sustained load behaviour
The 14 AWG gauge limits voltage drop over the 8 ft run when equipment draws continuous current up to the 15A rating. SJT insulation withstands the heat generated by prolonged server operation without softening. Moulded strain relief at both ends reduces conductor fatigue from vibration in dense rack rows. The cord remains within its thermal limits as long as the connected load does not exceed the rated amperage.
Interface limits
The NEMA 5-15P plug fits standard North American 125V receptacles on a PDU or wall outlet, while the C19 inlet mates with matching server power supplies. The 15A rating is the maximum continuous current the connectors and cable assembly are certified to carry at 125V. Exceeding this amperage or using the cord at higher voltages would violate the UL/cUL listing and the conductor's ampacity.
Highlights
- Heavy-duty 14 AWG cable handles 15 A server loads
- NEMA 5-15P to IEC-60320-C19 connects equipment to PDUs
- 8 ft length fits standard rack-to-PDU distances
- Fully moulded strain relief resists damage in dense cabinets
- UL and cUL listed for data-centre compliance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-51519-08 |
| Type | Power Cord |
| Color | Black |
| Length | 8 ft. |
| Connector Number | 2 |
| Specifications | Connector A: NEMA 5-15P Connector B: IEC-60320-C19 Amp/Voltage Rating: 15A/125V |
| Wire Gauge | 14 AWG |
| Conductor | SJT 14 AWG. x 3C |
| Features | This heavy duty NEMA 5-15P to C19 power cord is designed for server applications that require a higher-rated cable. Connect devices like computers and servers to a PDU in a data center. This heavy duty 14 AWG power cord is fully molded for durability. UL and cUL listed. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.32 kg |
| Package size | 269 × 191 × 28 mm |
Questions about this item
Will the 14 AWG SJT cable run warm when a server draws 15 A continuously?
The cord is rated 15 A at 125 V, so it is built to carry that load without overheating under normal conditions.
My server has a C19 inlet — is that the only connector I need on the equipment side?
Yes, the equipment end is an IEC-60320-C19 connector that plugs directly into a C19 inlet.
Can I plug this into an older PDU that only has NEMA 5-15R outlets?
The wall end is a standard NEMA 5-15P plug, so it fits any 5-15R receptacle.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115713BTC
In stock
