We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 25 ft power extension cord with C14 and C13 ends

Nippon Labs

Nippon Labs 30POW-10W1-16-02225 16 AWG C14-C13 25ft computer power extension cord

SKU CH-GTK6-661E7 MPN 30POW-10W1-16-02225

A 25 ft, 16 AWG extension cord with C14 to C13 connectors rated 13A at 250V for connecting equipment to a PDU or UPS

  • TypePower Extension Cable
  • ColorBlack
  • Length25 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Vo
  • Wire Gauge16 AWG
  • Extend power reach with 25 ft length
  • Connect PDU or UPS via C14 to C13
  • Handle 13 A at 250 V with 16 AWG
  • Fully molded construction resists wear
  • UL, cUL and CSA approved for safety

Extension cord for rack equipment

This 25 ft cable extends an existing power connection between a C14 inlet and a C13 outlet. It is rated at 13A and 250V using 16 AWG conductors. The cord suits data-centre racks, UPS units and PDUs where the stock lead falls short.

Check your inlet and outlet types

Verify that the source device presents a C14 socket and the load device accepts a C13 plug. Confirm the circuit can supply up to 13A at 250V. The cord is not intended for direct wall-outlet use or for equipment requiring a higher current rating.

Fully moulded construction with safety listings

The connectors are fully moulded for strain relief and long-term durability in rack environments. UL, cUL and CSA listings plus RoHS and REACH compliance indicate adherence to recognised safety and environmental standards. Buyers needing a heavier gauge for longer runs or higher loads should select a different cable.

Highlights

  • Extend power reach with 25 ft length
  • Connect PDU or UPS via C14 to C13
  • Handle 13 A at 250 V with 16 AWG
  • Fully molded construction resists wear
  • UL, cUL and CSA approved for safety

Specifications

BrandNippon Labs
Model30POW-10W1-16-02225
TypePower Extension Cable
ColorBlack
Length25 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Amp/Voltage Rating: 13A/250V
Wire Gauge16 AWG
ConductorUL SJT 16 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 16 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.68 kg
Package size203 × 127 × 51 mm

Questions about this item

Does the cord come with any extra hardware or do I need to buy connectors separately?

The package contains the 25 ft extension cable with a moulded C14 plug on one end and a C13 socket on the other; no additional hardware is required.

Should I choose the 16 AWG 13 A version or look for a heavier gauge?

The 16 AWG construction is rated for 13 A at 250 V, which matches typical desktop PSU and monitor draws, so this gauge is appropriate for standard IT equipment.

What does the 13 A / 250 V rating mean when I plug the cord into a PDU?

It means the cable can safely carry up to 13 amps at 250 volts continuously, so it will not overheat when powering normal rack-mounted servers or network gear from a PDU.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.