Nippon Labs
Nippon Labs 30POW-10W1-16-0221H computer power extension cord 1.5 ft 16 AWG C14 to C13 13A 250V
A 1.5 ft 16 AWG extension cable with C14 to C13 connectors rated 13A 250V for linking equipment to a PDU or UPS
- TypePower Extension Cable
- ColorBlack
- Length1.5 ft.
- Connector Number2
- SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Vo
- Wire Gauge16 AWG
- Extend reach by 1.5 ft with C14-to-C13 connectors
- Handle 13 A at 250 V for reliable power delivery
- 16 AWG SJT conductors ensure durable current capacity
- Fully moulded design resists wear in rack environments
- UL, cUL and CSA approved for safety compliance
Short Extension for Rack Power
This 1.5 ft cord adds a small reach between a C14 inlet and a C13 plug. It suits installers who need a tidy link inside a rack or between a UPS and a server. The 16 AWG conductors handle 13 A at 250 V for typical IT loads. It is not for users who need a longer run to a wall outlet.
Thermals Noise and Power Draw
The cable is passive and generates no noise or heat of its own. Its 16 AWG SJT conductors are rated for the stated 13 A at 250 V under normal continuous use. Voltage drop over 1.5 ft is negligible for standard power supplies. No active cooling or power budget is required.
Fully Molded C14 to C13 Connectors
Both ends are fully molded for strain relief and a secure fit in dense PDU strips. The short length keeps cable management simple in 1U or 2U spaces. Black SJT jacket resists abrasion in routing channels. It will not reach between floor-standing cabinets that are far apart.
Highlights
- Extend reach by 1.5 ft with C14-to-C13 connectors
- Handle 13 A at 250 V for reliable power delivery
- 16 AWG SJT conductors ensure durable current capacity
- Fully moulded design resists wear in rack environments
- UL, cUL and CSA approved for safety compliance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-16-0221H |
| Type | Power Extension Cable |
| Color | Black |
| Length | 1.5 ft. |
| Connector Number | 2 |
| Specifications | Connector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Voltage Rating: 13A/250V |
| Wire Gauge | 16 AWG |
| Conductor | UL SJT 16 AWG. x 3C |
| Features | Extend the length of an existing power cord for more flexibility. Connect computer equipment to a PDU or UPS in data center. This heavy duty 16 AWG power cord is fully molded for durability. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.09 kg |
| Package size | 127 × 51 × 25 mm |
Questions about this item
How do I connect the C14 and C13 ends to my UPS and server?
Plug the C14 connector into the UPS or PDU outlet and the C13 connector into the server power inlet. The fully moulded 16 AWG SJT cable handles 13A at 250V. The 1.5 ft length adds reach without slack.
Will the cord degrade or need replacement under normal data-centre use?
The UL, cUL and CSA approved SJT jacket resists heat and abrasion. RoHS and REACH compliant materials limit chemical breakdown. No user-serviceable parts exist; replace the whole assembly if the moulded ends crack or the cable shows cuts.
What is the maximum continuous load before the 16 AWG conductors become the limiting factor?
The cable is rated 13A at 250V. Sustained loads above 13A will exceed the 16 AWG conductor rating and the UL listing, causing insulation heating and potential failure. Stay at or below 13A continuous.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115819BTC
In stock
