We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft power extension cord with C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-16-02206 16 AWG C13/C14 6 ft computer power extension cord

SKU CH-FS80-GWYSR MPN 30POW-10W1-16-02206

Extends an existing power connection by six feet with a 16 AWG C14-to-C13 cable rated at 13 amps and 250 volts

  • TypePower Extension Cable
  • ColorBlack
  • Length6 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Vo
  • Wire Gauge16 AWG
  • Extend power reach for flexible equipment placement
  • 16 AWG conductors handle 13 A at 250 V safely
  • IEC-60320-C14 to C13 fits standard PDU and UPS ports
  • Fully moulded SJT jacket resists wear in rack environments
  • UL, cUL and CSA approved plus RoHS and REACH compliant

Flexible Power Extension for Rack Equipment

This 6 ft extension cord connects IEC-60320-C14 inlets to IEC-60320-C13 outlets, adding reach between servers, switches or workstations and a PDU or UPS. The 16 AWG SJT conductors carry 13 A at 250 V for standard single-phase loads.

Fully Moulded Connectors for Durable Daily Use

Both ends are fully moulded to resist strain from repeated insertion and cable routing in dense racks. The black SJT jacket meets UL, cUL and CSA listings and complies with RoHS and REACH material requirements.

Replaces Short Factory Cords When Equipment Sits

The cord upgrades installations where the supplied lead cannot reach the power strip or UPS outlet. It is not suited for builders who need a higher ampacity gauge or a different connector standard for specialised industrial gear.

Highlights

  • Extend power reach for flexible equipment placement
  • 16 AWG conductors handle 13 A at 250 V safely
  • IEC-60320-C14 to C13 fits standard PDU and UPS ports
  • Fully moulded SJT jacket resists wear in rack environments
  • UL, cUL and CSA approved plus RoHS and REACH compliant

Specifications

BrandNippon Labs
Model30POW-10W1-16-02206
TypePower Extension Cable
ColorBlack
Length6 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Amp/Voltage Rating: 13A/250V
Wire Gauge16 AWG
ConductorUL SJT 16 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 16 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.25 kg
Package size229 × 114 × 25 mm

Questions about this item

What current does the C13/C14 IEC-60320 connection actually allow?

The cable is rated for 13 A at 250 V, so the IEC-60320-C14 to C13 link will carry up to 13 A in practice.

What clearance does the 16 AWG SJT jacket need behind a rack PDU?

The fully moulded 16 AWG SJT cable is 6 ft long; allow enough depth for the moulded C13 and C14 heads plus a gentle bend radius.

How do you attach it to a UPS without reversing the ends?

Plug the C14 end into the UPS or PDU outlet, then connect the C13 end to the device inlet; the keyed IEC-60320 shells prevent mis-insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.