We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft extension cord with C14 plug and C13 socket, fully moulded 14 AWG cable

Nippon Labs

Nippon Labs 30POW-10W1-14-02208 14 AWG C14 to C13 computer power extension cord 8 ft

SKU CH-RHPZ-ES12Q MPN 30POW-10W1-14-02208

Extends an existing C13 power cord by eight feet with a 14 AWG SJT cable rated for 15 A at 250 V

  • TypeExtension Cable
  • ColorBlack
  • Length8 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13
  • Wire Gauge14 AWG
  • Extend power reach for flexible equipment placement with an 8 ft cord
  • Carry higher current safely using heavy-duty 14 AWG conductors
  • Connect directly to PDU or UPS units via IEC C14 to C13 connectors
  • Built to last with fully molded strain-relief construction
  • Meets safety standards with UL, cUL and CSA certifications

Extension cord for data-centre equipment

This 8 ft power extension cord adds reach between a C14 inlet and a C13 outlet. It suits server racks, network cabinets and workstation setups where the stock cable falls short of a PDU or UPS. The black SJT jacket blends with standard rack wiring.

14 AWG conductor rating

The cord uses UL-listed 14 AWG three-conductor SJT wire rated for 15 A at 250 V. That gauge supports typical single-phase loads in rackmount gear without voltage drop over the 8 ft run. Thinner cords would limit the safe current for the same length.

Handles standard rackmount loads

It comfortably powers servers, switches and storage units that draw up to the 15 A rating. The fully moulded connectors resist strain from cable management arms. It will not support loads that exceed the 15 A limit or installations needing a longer run than 8 ft.

Highlights

  • Extend power reach for flexible equipment placement with an 8 ft cord
  • Carry higher current safely using heavy-duty 14 AWG conductors
  • Connect directly to PDU or UPS units via IEC C14 to C13 connectors
  • Built to last with fully molded strain-relief construction
  • Meets safety standards with UL, cUL and CSA certifications

Specifications

BrandNippon Labs
Model30POW-10W1-14-02208
TypeExtension Cable
ColorBlack
Length8 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Wire Gauge14 AWG
ConductorUL SJT 14 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 14 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.32 kg
Package size178 × 89 × 25 mm

Questions about this item

What does the 14 AWG rating mean for a real installation?

It indicates a thicker conductor that supports the 15 A / 250 V rating with less voltage drop over the 8 ft run.

What does the C14-to-C13 IEC 60320 connection actually limit?

The pair is rated for 10 A at 250 V, so the cord caps at 10 A even though the wire handles 15 A.

What clearance does the fully moulded C14 plug need to seat in a rack PDU?

The low-profile moulding fits standard IEC 60320 C13 outlets on PDUs and UPS units without blocking adjacent ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.