We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 14 AWG IEC C14 to C13 power extension cable 4 ft

Nippon Labs

Nippon Labs 30POW-10W1-14-02204BU 14 AWG IEC-60320-C14 to C13 computer power extension cord 4 ft

SKU CH-R8T6-8P9JQ MPN 30POW-10W1-14-02204BU

A 4 ft blue 14 AWG extension cable with IEC-60320-C14 to C13 connectors rated 15A at 250V for connecting equipment to a PDU or UPS

  • TypePower Extension Cable
  • ColorBlue
  • Length4 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Vo
  • Wire Gauge14 AWG
  • Extend power reach for flexible equipment placement
  • Blue jacket enables quick identification in dense racks
  • 14 AWG conductors handle 15A at 250V safely
  • Fully molded ends resist wear from repeated connect cycles
  • UL, cUL and CSA listings confirm safety compliance

IEC C14 to C13 extension cord

This 4 ft power extension cord carries a 15A 250V rating on 14 AWG UL SJT conductors. The blue jacket helps identify the cable in dense rack environments. It connects a C14 inlet to a C13 outlet for extending existing power leads.

Fully moulded connectors and SJT sheath

Both ends are fully moulded for strain relief and long term durability. The SJT thermoplastic jacket resists abrasion and meets UL, cUL and CSA safety listings. RoHS and REACH compliant materials are used throughout the assembly.

Replaces shorter fixed cords in rack builds

Use this cord when a server PSU or PDU cable cannot reach the power source. It adds 4 ft of reach without adding bulk. Builders who need longer runs or different colour coding will need a different length or colour.

Highlights

  • Extend power reach for flexible equipment placement
  • Blue jacket enables quick identification in dense racks
  • 14 AWG conductors handle 15A at 250V safely
  • Fully molded ends resist wear from repeated connect cycles
  • UL, cUL and CSA listings confirm safety compliance

Specifications

BrandNippon Labs
Model30POW-10W1-14-02204BU
TypePower Extension Cable
ColorBlue
Length4 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Amp/Voltage Rating: 15A/250V
Wire Gauge14 AWG
ConductorUL SJT 14 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
Colored cord is designed for easy identification in a high density data environment.
This heavy duty 14 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.18 kg
Package size127 × 51 × 51 mm

Questions about this item

What does the 15A 250V rating on the IEC-60320-C14 to C13 cord cap in practice?

The cable is rated for continuous loads up to 15 amps at 250 volts, matching standard PDU and UPS inlet limits in data-centre racks.

What clearance does the moulded C14 plug and C13 connector need behind a rack-mounted device?

Both ends are fully moulded low-profile bodies; allow enough rear depth for the connector housing plus cable bend radius so the jacket is not kinked.

How do you install the extension without creating a loose connection at the PDU?

Seat the C14 plug fully into the PDU outlet until the retention lug clicks, then route the 4 ft SJT jacket with slack so weight cannot pull the C13 free from the equipment inlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.