We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1ft power extension cord with C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-14-02201 computer power extension cord 14 AWG 1ft C14 to C13

SKU CH-2WHW-8MCHK MPN 30POW-10W1-14-02201

A 1-foot, 14 AWG extension cord with IEC C14 to C13 connectors rated for 15 A at 250 V

  • TypeExtension Cable
  • ColorBlack
  • Length1 Foot
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13
  • Wire Gauge14 AWG
  • Extend power reach with one-foot C14-to-C13 extension
  • Heavy-duty 14 AWG conductors handle 15 A at 250 V
  • Fully moulded SJT jacket resists wear in rack environments
  • UL, cUL and CSA approved for data-centre compliance
  • RoHS and REACH compliant materials meet environmental directives

Purpose and audience

This one-foot extension cord links a C14 inlet to a C13 outlet, letting you bridge the gap between a server, workstation or network device and a PDU or UPS in a rack. It is built for IT professionals and data-centre technicians who need a short, reliable jumper without excess cable slack.

Thermals, noise and power

The cord carries a 15 A / 250 V rating on UL SJT 14 AWG three-conductor wire, so it handles typical rackmount power loads without heating up. Passive construction means it adds no fan noise or active cooling requirement to the installation.

Build and daily use

Fully moulded connectors and a black SJT jacket give the assembly a solid feel that resists snagging when routed through cable managers. The C14-to-C13 orientation matches standard PDU and equipment port layouts, so the cord plugs in directly without adapters or awkward bends.

Highlights

  • Extend power reach with one-foot C14-to-C13 extension
  • Heavy-duty 14 AWG conductors handle 15 A at 250 V
  • Fully moulded SJT jacket resists wear in rack environments
  • UL, cUL and CSA approved for data-centre compliance
  • RoHS and REACH compliant materials meet environmental directives

Specifications

BrandNippon Labs
Model30POW-10W1-14-02201
TypeExtension Cable
ColorBlack
Length1 Foot
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Wire Gauge14 AWG
ConductorUL SJT 14 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 14 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.07 kg
Package size127 × 51 × 25 mm

Questions about this item

How do I connect the C14 end to my PDU without bending the pins?

Align the keyed IEC-60320-C14 plug with the PDU's C13 outlet, push straight in until the latch clicks, and avoid angling the moulded body during insertion.

When should I replace this 14 AWG SJT extension cord?

Replace it if the black jacket shows cuts, the moulded connectors crack, the latch fails to hold, or the cord feels warm along its 1 foot length during normal 15 A use.

What is the continuous current limit before the cable gets hot?

The UL SJT 14 AWG 3-conductor rating is 15 A at 250 V; sustained loads above 15 A will cause heating and should be avoided.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.