Nippon Labs
Nippon Labs 30POW-10W1-13201-NE 18 AWG 1 ft NEMA 1-15P to C7 ac power cords for laptop
A 1 ft non-polarized 18 AWG cord connects a NEMA 1-15P plug to a C7 inlet for laptops and other two-slot devices
- TypeNotebook Power Cord
- ColorBlack
- Length1 Foot
- Connector Number2
- Connector DetailNEMA 1-15P to IEC-60320-C7
- SpecificationsConnector A: NEMA 1-15P Connector B: IEC-60320-C7 Non-Polari
- Fits laptops and AV gear needing a two-slot non-polarized cord
- 18 AWG SPT-2 conductors handle 10 A at 125 V
- Fully moulded construction resists wear from daily use
- UL, cUL and CSA listed for North American safety compliance
- Materials meet RoHS and REACH substance restrictions
1 ft NEMA 1-15P to C7 power cord
This 1 ft non-polarised cord connects laptops, VCRs, DVD players and other devices that use a 2-slot C7 inlet to a standard US NEMA 1-15P wall outlet. It is built as a direct replacement for damaged, overused or missing factory leads. The short length suits desktop or bench use where excess cable would clutter the workspace. Buyers who need a longer reach or a polarised C5 connection cannot use this model.
18 AWG SPT-2 conductors rated 10 A at 125 V
Two 18 AWG conductors in an SPT-2 jacket provide enough current capacity for typical notebook power bricks and legacy AV gear drawing up to 10 A. The cord is UL, cUL listed and CSA approved, confirming it meets North American safety requirements for this rating. It will not support equipment that demands higher amperage or a grounded three-prong inlet.
Fully moulded strain relief on both ends
Each connector is fully moulded to the cable, protecting the solder joints from bending stress during daily plugging and unpluging. The NEMA 1-15P plug has no ground pin, so it fits older two-slot outlets but cannot be used where a grounded connection is required. The C7 end has no edge key, ensuring compatibility with non-polarised inlets only. All materials comply with RoHS and REACH directives.
Highlights
- Fits laptops and AV gear needing a two-slot non-polarized cord
- 18 AWG SPT-2 conductors handle 10 A at 125 V
- Fully moulded construction resists wear from daily use
- UL, cUL and CSA listed for North American safety compliance
- Materials meet RoHS and REACH substance restrictions
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-13201-NE |
| Type | Notebook Power Cord |
| Color | Black |
| Length | 1 Foot |
| Connector Number | 2 |
| Connector Detail | NEMA 1-15P to IEC-60320-C7 |
| Specifications | Connector A: NEMA 1-15P Connector B: IEC-60320-C7 Non-Polarized, No Edge Conductor: SPT-2 18 AWG. x 2C Amp/Voltage Rating: 10A/125V |
| Wire Gauge | 18 AWG |
| Conductor | SPT-2 18 AWG. x 2C |
| Features | This non-polarized power cord is designed for laptops, VCRs, DVD players and other devices that use a 2-slot non-polarized cord. This heavy duty 18 AWG power cord is fully molded for durability. Ideal solution for replacing damaged, overused or missing power cords. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.09 kg |
| Package size | 127 × 51 × 25 mm |
Questions about this item
Will this 1 ft NEMA 1-15P to C7 cord reach a wall outlet if my laptop sits on a desk?
At one foot long, the cable is intended for very close connections such as a laptop on a shelf directly above the socket.
How can I confirm the cord is working once I plug it in?
The laptop power LED should illuminate and the battery icon will show charging when the C7 end is seated fully.
Does the package include only the black 18 AWG cord or any extra adapters?
The box contains the single non-polarized NEMA 1-15P to IEC-60320-C7 power cord.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



