Nippon Labs
Nippon Labs 30POW-10W1-05201 AC Power Cord C14 to NEMA 5-15R 18 AWG 1 ft
Connects NEMA 5-15P devices to C13 outlets on PDUs or UPS units with a 1 ft, 18 AWG cord rated 10A at 125V
- TypeAC Power Adapter Cord
- ColorBlack
- Length1 Foot
- Connector Number2
- Connector DetailIEC-60320-C14 to NEMA 5-15R
- SpecificationsConnector A: IEC-60320-C14 Connector B: NEMA 5-15R Conductor
- Connect printers or monitors to a PDU or UPS using the C14-to-NEMA 5-15R connectors
- Extend an existing power cord or outlet by one foot for added placement flexibility
- Fully moulded 18 AWG construction provides durable, heavy-duty performance
- Rated for 10 A at 125 V to support standard office equipment safely
- UL, cUL and CSA approved with RoHS and REACH compliant materials
What this cord does
This Nippon Labs adapter cord carries a C14 plug on one end and a NEMA 5-15R receptacle on the other. It lets equipment with a standard North American plug draw power from a PDU or UPS that provides a C13 outlet. The 1 ft length keeps cable clutter low in tight rack or desk setups.
Who should buy it
IT staff extending a short device cord to reach a rack PDU will find the 10 A, 125 V rating and fully moulded 18 AWG SVT construction fit the job. Buyers who need a longer reach, a different connector gender or a higher current rating should look at something else.
Behaviour under load
The 18 AWG conductors are rated for continuous 10 A at 125 V, so the cord runs cool when powering monitors, printers or similar loads for hours. UL, cUL and CSA listings confirm the materials meet sustained-temperature requirements without softening or degradation.
Highlights
- Connect printers or monitors to a PDU or UPS using the C14-to-NEMA 5-15R connectors
- Extend an existing power cord or outlet by one foot for added placement flexibility
- Fully moulded 18 AWG construction provides durable, heavy-duty performance
- Rated for 10 A at 125 V to support standard office equipment safely
- UL, cUL and CSA approved with RoHS and REACH compliant materials
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-05201 |
| Type | AC Power Adapter Cord |
| Color | Black |
| Length | 1 Foot |
| Connector Number | 2 |
| Connector Detail | IEC-60320-C14 to NEMA 5-15R |
| Specifications | Connector A: IEC-60320-C14 Connector B: NEMA 5-15R Conductor: SVT 18 AWG. x 3C Amp/Voltage Rating: 10A/125V |
| Wire Gauge | 18 AWG |
| Conductor | SVT 18 AWG. x 3C |
| Features | Ideal for connecting printers, monitors or other devices with NEMA 5-15P plug to a PDU or UPS with C13 outlet. Extend the length of an existing power cord or outlet for more flexibility. This heavy duty 18 AWG power cord is fully molded for durability. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.09 kg |
| Package size | 330 × 102 × 38 mm |
Questions about this item
What type of outlet must my power strip or UPS have for the C14 connector on this cord to plug in?
The C14 plug on this cord mates with a standard IEC 60320 C13 outlet, which is the rectangular three-pin receptacle found on most PDUs and UPS units.
Can I use this cord to connect a monitor that has a standard NEMA 5-15P plug to an older UPS that only provides C13 outlets?
Yes, the NEMA 5-15R receptacle on this cord accepts the monitor's 5-15P plug while the C14 end plugs into the UPS C13 outlet, bridging the two connector types.
After plugging everything in, how can I confirm the cord is delivering power correctly?
Verify that the connected device powers on normally and that the cord remains cool to the touch during operation, indicating the 18 AWG conductors are handling the load without issue.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



