Nippon Labs
Nippon Labs 30POW-10W1-04201 16 AWG 1 ft NEMA 5-15P to 5-15R computer power extension cord
A 1 ft black 16 AWG SJT extension cord with NEMA 5-15P to 5-15R connectors, rated 13A at 125V, fully moulded and UL, cUL and CSA approved
- TypePower Cord Extension Cable
- ColorBlack
- Length1 Foot
- Connector Number2
- Connector DetailNEMA 5-15P to NEMA 5-15R
- SpecificationsConnector A: NEMA 5-15P Connector B: NEMA 5-15R Conductor: S
- Extends power reach by one foot with NEMA 5-15P to 5-15R connectors
- 16 AWG SJT conductors rated 13 A at 125 V handle desktop and monitor loads
- Fully moulded strain relief protects the cable from daily bending and tugging
- Carries UL, cUL and CSA safety certifications for regulated environments
- Built with RoHS and REACH compliant materials for restricted substance assurance
1 ft Power Cord Extension
This 1 ft NEMA 5-15P to 5-15R extension cord adds reach to an existing power cable or wall outlet. It uses 16 AWG conductors in an SJT jacket rated for 13 A at 125 V. The fully moulded connectors and black finish are built for indoor durability. UL, cUL and CSA listings confirm compliance with North American safety standards.
Desktop and peripheral users needing a short reach
The one-foot length suits tight spaces behind a desk, rack or UPS where a longer cable would create clutter. It is not intended for runs across a room or for routing through walls. Installers who need a weather-resistant jacket or a higher temperature rating should select a cord specified for those conditions.
16 AWG conductor rating
The 16 AWG copper conductors set the safe continuous load at 13 A for 125 V circuits. Exceeding this amperage risks overheating and voids the safety certifications. Verify that the connected equipment draws 13 A or less before use.
Highlights
- Extends power reach by one foot with NEMA 5-15P to 5-15R connectors
- 16 AWG SJT conductors rated 13 A at 125 V handle desktop and monitor loads
- Fully moulded strain relief protects the cable from daily bending and tugging
- Carries UL, cUL and CSA safety certifications for regulated environments
- Built with RoHS and REACH compliant materials for restricted substance assurance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-04201 |
| Type | Power Cord Extension Cable |
| Color | Black |
| Length | 1 Foot |
| Connector Number | 2 |
| Connector Detail | NEMA 5-15P to NEMA 5-15R |
| Specifications | Connector A: NEMA 5-15P Connector B: NEMA 5-15R Conductor: SJT 16 AWG. x 3C Amp/Voltage Rating: 13A/125V |
| Wire Gauge | 16 AWG |
| Conductor | SJT 16 AWG. x 3C |
| Features | Extend the length of an existing power cord or outlet for more flexibility. This heavy duty 16 AWG power cord is fully molded for durability. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.09 kg |
| Package size | 127 × 51 × 25 mm |
Questions about this item
Does the 16 AWG SJT cable run warm when drawing 13 A continuously?
The cord is rated for 13 A at 125 V, so it handles that load within its design limits without excessive heat.
What must the device I plug in already have for this extension to work?
Your equipment needs a standard NEMA 5-15P plug to mate with the 5-15R receptacle on this cord.
Will the NEMA 5-15P plug fit the older 5-15R wall outlets in my office?
Yes, the 5-15P plug is fully compatible with existing 5-15R receptacles.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
